ABI Error Message

746:	LINE ITEM VALUE MISSING

THIS MESSAGE OCCURS WHEN ZEROES OR SPACES ARE SENT FOR THE VALUE IN POSITIONS 8-17 OF THE 40 RECORD OR POSITIONS 69-78 OF THE 70, 80 OR 81 RECORDS IN A "9802" TRANSMISSION. IN OTHER TYPES OF TRANSMISSIONS, SENDING SPACES OR ZEROES WILL YIELD AN 800 ERROR MESSAGE "NO MATCH FOR ESTIMATED COMP DUTIES" OR IN THE CASE OF GSP OR LDDC, A WARNING MESSAGE 28E "CENSUS OR-LO VALUE/QUANTITY."

VAU:	ULT CONSIGNEE IN ENTRY HEADER

WHEN AN ULTIMATE CONSIGNEE NUMBER IS TRANSMITTED IN THE HI APPLICATION, REC H2, POS 11-22 (INDICATING ONE ULTIMATE CONSIGNEE FOR THE SHIPMENT), POS 33-44 IN REC H5 MUST BE SPACE FILLED.

8D1:	INVALID ABI BROKER

THIS ERROR WAS FIRST NOTICED IN JULY 2000. IT OCCURRED WHEN A FILER SENT A FDA ENTRY UNDER ONE DDPP/FFF 'A' RECORD, ACCEPTED ERROR FREE, THEN ATTEMPTED A 'CP' CORRECTION UNDER A DIFFERENT DDPP/FFF 'A' RECORD SITE.

AQC:	FILING DDPP NOT PROTEST PORT

THE ADDRESS DDPP CODE IS VALID, BUT THE USCS ACS REGION-DISTRICT-PORT CODE RECORD FOR THAT PORT IS NOT FLAGGED AS OPERATIONAL FOR ELECTRONIC PROTEST. THE ELECTRONIC PROTEST SWITCH MUST BE SET TO 'YES'. PLEASE CONTACT THE PORT.

94Q:	ERROR IN BGM SEGMENT

EDIFACT SYNTAX ERROR. AN ERROR IN THE BGM (BEGINNING OF MESSAGE) SEGMENT HAS OCCURRED.

17J:	MORE THAN ONE APPLICATION CODE

MORE THAN ONE APPLICATION (B TO Y) TYPE WAS SUBMITTED WITHIN THE Z SET.

EJX:	UNITS MUST BE IN ORDER

THIS MESSAGE IS GENERATED IN RESPONSE TO AN AUTOMATED INVOICE TRANSMISSION (APPLICATION CI). SHIPPING UNIT IDENTIFICATIONS CAN BE MADE AT TWO LEVELS, IN THE C06/C07 RECORD AND/OR THE C47/C49 RECORDS. IN EITHER CASE, THE OUTER SHIPPING UNIT (USUALLY A CONTAINER) IS IDENTIFIED IN THE C06 RECORD. IF INTERIOR PACKAGING ENTITIES ARE SEPARATELY IDENTIFIED WITHIN A CONTAINER, THOSE IDENTIFIERS ARE REPORTED IN THE C07/C49 REC. EACH OF THESE RECORDS PROVIDES SPACE TO REPORT ONE OR TWO INTERIOR PACKAGING UNIT IDENTIFIERS (OR A RANGE OF IDENTIFIERS). THE INTERIOR PACKAGING IDENTIFERS MUST BE UNIQUE AND MUST BE REPORTED IN ORDER. THAT IS, THE C07 REC, POS 4-20, IS USED TO REPORT THE FIRST PACKAGING IDENTIFIER. THE NUMBER IN THIS FIELD MUST BE DIFFERENT FROM THE UNIT IDENTIFIER IN POS 21-37. FURTHER, DATA CANNOT BE TRANSMITTED IN POS 21-37 UNLESS POS 4-20 IS USED FIRST. WHEN REPORTING RANGES, THE NUMBER OF DIGITS IN THE HIGHEST RANGE MUST BE FOLLOWED FOR ALL RANGES (USE 0001 TO 0800 IF THE HIGHEST NUMBER IN THE RANGE IS 4000, NOT 1 TO 800, 801 TO 1600, FOR EXAMPLE).

99H:	ENTRY/BOND TYPE REQUIRES C/O 'CA'

FOR ENTRY TYPE '23', AND BOND TYPE OF '0' OR SPACE REQUIRES COUNTRY OF ORIGIN OF 'CA'.

IN2:	ENT/PROC FILER CODE CONFLICT

THIS MESSAGE IS GENERATED IN RESPONSE TO A SELECTIVITY RESULTS QUERY INPUT (APPLICATION IN). IF THE FILER CODE OF THE ENTRY NUMBER TRANSMITTED IN THE R1 INPUT RECORD DOES NOT AGREE WITH B RECORD FILER CODE, THIS ERROR MESSAGE WILL RESULT.

ARK:	PROTESTANT NAME REQUIRED

PROTESTANT NAME IS REQUIRED WHEN PROTESTANT TYPE IS "F" (FOREIGN) OR "O" (OTHER).

LU4:	INVALID LUMBER PERMIT NUMBER

IF THE ABI FILER REPORTS A LUMBER PERMIT TYPE (40 REC, POS 70-72), A NINE- POSITION NUMERIC LUMBER PERMIT NUMBER IS REQUIRED IN THE 51 REC, POS 57-65. IF THE PERMIT NUMBER IS OMITTED, THIS ERROR MESSAGE WILL BE GENERATED.

8WZ:	INVALID SUB-HOUSE BL/AWB NUMBER

THIS MESSAGE IS GENERATED IN RESPONSE TO A BILL OF LADING UPDATE TRANSACTION (APPLICATION LN). THE SUB-HOUSE BILL NUMBER IS TRANSMTTED IN THE L3 REC, POS 52-63. IF THE NUMBER REPORTED IN THIS FIELD IS FEWER THAN 12 CHARACTERS LONG, THE NUMBER SHOULD BE LEFT JUSTIFIED. IF ANY LEADING SPACES ARE INCLUDED IN THE HOUSE BILL NUMBER, THIS ERROR MESSAGE WILL BE GENERATED.

17K:	INVALID APPLICATION CODE

THE APPLICATION CODE FOUND ON THE 'B' RECORD WAS LOCATED IN THE APPLICATION CODE FILE, HOWEVER, THE CODE IS NUMERIC AND RESERVED FOR SPECIAL USE.

WT1:	R89 RECS NOT PROPERLY UTILIZED

EACH R89 RECORD CAN ACCOMMODATE 3 FEE CLASS CODES. THIS IS AN ACS PERFORMANCE REQUIREMENT, I.E. SPACE ALLOCATION MUST BE OPTIMIZED. EXAMPLE WT1 ERROR: IF 2 R89 RECORDS ARE SUBMITTED AND THE FIRST CONTAINS TWO FEE CLASS CODES AND THE SECOND R89 CONTAINS 1 FEE CLASS CODE, ALL OF THE FEE CLASS CODES SHOULD HAVE BEEN SUBMITTED ON ONE R89 RECORD.

23H:	BOND SANCTION IN EFFECT

THIS MESSAGE INDICATES THAT A SANCTION HAS BEEN PLACED AGAINST THE INDIVIDUAL BOND TRANSMITTED BY THE FILER.

APQ:	WITHDRAWAL REQ. IND. INVALID

A REQUEST TO WITHDRAW A PROTEST, CLAIM OR INTERVENTION, INDICATED BY 'W', MAY BE SUBMITTED AT ANY TIME UNTIL THE PROTEST OR CLAIM IS ADJUDICATED BY CUSTOMS. THE VALUE SUBMITTED IN THE WITHDRAWAL REQUEST FIELD, P10 REC, POS 66, MUST BE "W", OR MUST BE BLANK. ANY OTHER CHARACTER IN THIS FIELD WILL GENERATE THIS ERROR MESSAGE.

VK6:	HLS: BMS MAP FIELD NAME REQUIRED

A BMS MAP FIELD NAME OPERAND IS REQUIRED WITH OPERAND 'M'

VOZ:	DT HS7: FORM MAY BE REQUIRED

IMPORTED PRODUCTS SUBJECT TO REVIEW BY THE DEPARTMENT OF TRANSPORTATION ARE CODED DT1 OR DT2 ON THE HARMONIZED TARIFF DATABASE. IF THE CODING IS DT1, THE FILER HAS THE OPTION OF REPORTING THE DATA OR SENDING A DISCLAIMER. IF NEITHER DATA NOR A DISCLAIMER IS TRANSMITTED, THE ABOVE ERROR MESSAGE WILL BE GENERATED (AS OF JAN 1998, ONLY 7 OF THE DOT-REGULATED TARIFF NUMBERS ARE CODED DT1)

APM:	VOIDANCE REQ. IND. INVALID

A REQUEST FOR VOIDANCE OF DENIAL, INDICATED BY 'R', MAY BE SUBMITTED WITHIN 90 DAYS AFTER PROTEST HAS BEEN DENIED BY CUSTOMS. THE VALUE SUBMITTED IN THE VOIDANCE REQUEST FIELD IS NOT 'R'.

VP8:	TOT OWED U.S. MUST = ZERO

THIS MESSAGE OCCURS IN THE NAFTA DUTY DEFERRAL MODULE. IF A "SPACE" IS SENT IN THE D30 RECORD, POSITION 68, IT INDICATES THAT THE ASSOCIATED CANADIAN ENTRY DATA WILL BE PROVIDED. THE SYSTEM THEN LOOKS AT THE TOTAL ESTIMATED DUTY (US) IN THE D30 RECORD, POSITIONS 15-25, AND THIS ERROR MESSAGE WILL BE GENERATED IF THE DUTY IS NOT EQUAL TO ZERO.

2AZ:	SURETY CODE NOT REQD FOR BOND TYP

THIS MESSAGE PERTAINS TO INFORMAL ENTRY SUMMARIES, TRANSMITTED WITH A SURETY CODE IN POS 73-75 OF THE 10 REC. IF NO BOND TYPE IS TRANSMITTED IN POS 49 OF THIS RECORD, THE SURETY CODE IS NOT PERMITTED.

EI4:	INVALID ALLOWANCE CHARGE AMOUNT

THIS MESSAGE IS GENERATED IN RESPONSE TO AN AUTOMATED INVOICE TRANSMISSION (APPLICATION CI). THE C17 AND C18 RECORDS PROVIDE FOR THE REPORTING OF HEADER LEVEL CHARGES/ALLOWANCES. (THE C51/C53 RECORDS REPORT THESE ELEMENTS AT THE LINE LEVEL, BUT THIS MESSAGE ALSO APPLIES TO THOSE RECORDS). THE DOLLAR AMOUNT IN POS 4-18 OF THE C18 RECORD MUST VARY BY NO MORE THAN ONE CENT, PLUS OR MINUS, WHEN COMPARED TO THE DOLLAR AMOUNT PRODUCED FROM THE APPROPRIATE CALCULATION THAT OCCURS AS A RESULT OF THE COMBINATION OF ELEMENTS TRANSMITTED ON THE C17 RECORD. THE COMBINATION OF ELEMENTS IN THE C17 RECORD THAT ARE USED IN THE CALCULATION IS: - RATE/PER UNIT X UNIT PRICE BASIS /NBR OF PRICING UNITS (FROM ALL THE PRECEDING C33 RECORDS.) (IF C51/53 RECORDS ARE USED, ONLY THE C33 RECORD IMMEDIATELY PRECEDING THE C51/53 RECORDS IS USED TO DETERMINE THE NUMBER OF PRICING UNITS).

12P:	FIRMS CODE NOT ON FILE

FIRMS CODE TRANSMITTED NOT FOUND ON DATABASE.

VC6:	FW 3-177: VALUE MUST BE >0

IN THE FISH & WILDLIFE INTERFACE THE FWS VALUE (FW01 RECORD, POSITIONS 63-72) IS A MANDATORY RECORD. THIS ERROR MESSAGE WILL OCCUR IF THE DATA ELEMENT CONTAINS ALL ZEROES OR BLANKS.

27P:	*CENSUS* MAXIMUM VALUE EXCEEDED

THE TOTAL LINE ITEM VALUE EXCEEDS 100,000,000 DOLLARS. THIS MAY BE NECESSARY WHEN THE CRITERIA MUST BE DIFFERENT FOR ACS/ABI THAN THE STATISTICAL EDITS AT CENSUS.

 Next 10 >>Showing results 1 to 25 of 1405