ABI Error Message

VKF:	DBID INVALID

THE DBID IS INCORRECT FOR THE TABLE SPECIFIED. EITHER LEAVE BLANK OR PROVIDE CORRECT DBID. DBID IS REQUIRED FOR INPUT ONLY WHEN MULTIPLE DBID'S APPLY TO TABLE.

VK6:	HLS: BMS MAP FIELD NAME REQUIRED

A BMS MAP FIELD NAME OPERAND IS REQUIRED WITH OPERAND 'M'

EJG:	INVALID TITLE OF DECLARANT

THIS MESSAGE IS GENERATED IN RESPONSE TO AN AUTOMATED INVOICE TRANSMISSION (APPLICATION CI). THE C95 REC, POS 37-38, MUST CONTAIN A VALID CODE IDENTIFYING THE TITLE OF THE DECLARANT. THE ONLY VALID CODES, AS OF THIS DATE, ARE "IR" (IMPORTER) OR "CB" (CUSTOMS BROKER). AS OF 4/5/95, "IM" (IMPORTER) MAY ALSO BE USED.

VEL:	FC 740:QUANTITY MUST BE > ZERO

IF THE CONDITIONAL FCC FC02 RECORD IS SENT, THE FCC QUANTITY IN POSITIONS 5-16 OF THIS RECORD MUST BE GREATER THAN ZERO.

AER:	ERROR IN A 32 REC; RLSE 5

THIS MESSAGE FOLLOWS A MORE SPECIFIC ERROR MESSAGE (I.E. "1F5 RELEASE NOT ON FILE") IN A CONSOLIDATED ENTRY SUMMARY TRANSACTION. IT NOTIFIES THE FILER THAT THE ERROR IS IN THE FIFTH RELEASE IN THE 32 RECORD.

2CI:	INBOND - INVALID CHECK DIGIT

ENTRY SUMMARY OR CARGO RELEASE INPUT TRANSACTIONS THAT REPORT PAPERLESS MASTER INBOND NUMBERS (THOSE STARTING WITH "V") MUST TRANSMIT A VALID MIB NUMBER, INCLUDING THE LAST DIGIT (CHECK DIGIT). IF THE LAST DIGIT IS NOT CORRECT, PRESUMING THAT THE FIRST 10 DIGITS ARE CORRECT, THIS ERROR MESSAGE WILL RESULT. THE FILER SHOULD RECONFIRM THE ENTIRE PAPERLESS MIB NUMBER WITH THE ISSUING CARRIER. NOTE: ERRORS IN THE CHECK DIGIT FOR AIR WAYBILLS USED AS INBOND NUMBERS OR FOR CONVENTIONAL (9 DIGIT ALL NUMERIC) INBOND NUMBERS WILL GENERATE ERROR MESSAGE 361.

VL6:	DRAWBACK DDPP MUST = B REC DDPP

THIS MESSAGE MEANS THAT WHILE THE DRAWBACK CLAIM DDPP MAY BE CORRECT, IT DOES NOT MATCH THE DDPP OF THE DRAWBACK FILING LOCATION (THE PC PORT CODE THAT THE MAINFRAME RECOGNIZES). THIS MESSAGE MAY APPEAR IN COMBINATION WITH ANY OTHER INVALID DDPP MESSAGES. IN ABI, THE PORT CODE IN THE 'B' CONTROL RECORD MUST MATCH THE PORT CODE FOR THE CLAIM IN THE 'D10' RECORD.

681:	CUSTOMS REL VIA EREL ON FILE

THIS ERROR MESSAGE OCCURS WHEN A FILER ATTEMPTS TO SEND SELECTIVITY DATA FOR AN ENTRY THAT HAS BEEN PREVIOUSLY RELEASED. A FILER WILL RECEIVE THIS MESSAGE WHETHER THE RELEASE OF THE ENTRY NUMBER WAS VIA A "PAPERLESS" MESSAGE OR "DOCS REQUIRED".  IN THE LATTER CASE, ONCE THE ON-LINE PROCESSING HAS BEEN COMPLETED, A RETRANSMISSION OF THE CARGO DATA WILL GENERATE THIS MESSAGE AT THE TIME OF HI TRANSMISSION.

APZ:	FAX SENT DATE NOT APPLICABLE

THE CCYYMMDD THAT A FACSIMILE WAS SENT TO CUSTOMS IS REQUIRED AT INITIAL PROTEST, CLAIM AND INTERVENTION FILING WHEN THE VALUE SUBMITTED IN THE FAX INDICATOR IS 'S'. NO VALUE SUBMITTED IN THE FAX SENT DATE WILL BE ACCEPTED AFT ER INITIAL FILING, OR WHEN THE FAX INDICATOR IS NOT 'S'.

327:	INVALID DP-SITE DISTRICT/PORT

THIS MESSAGE RESULTS WHEN A FILER SENDS AN 'A' RECORD DISTRICT/PORT/FILER SITE THAT DOES NOT EXIST IN THE BROKER PROFILE IN ACS. A BROKER PROFILE RECORD MUST EXIST FOR THE TRANSMITTED DP-SITE DISTRICT/PORT. IN ADDITION TO THE ABOVE, FOR FILERS WHO HAVE OFFICE CODES IN THEIR BROKER PROFILE RECORDS, THIS MESSAGE WILL BE GENERATED IF THE PORT CODE IN THE 10 RECORD OF THE EI APPLICATION DOES NOT AGREE EXACTLY WITH THE PORT CODE IN THE "B" RECORD. (NOTE 1 ON PAGE APL-6 OF THE CATAIR INDICATES THAT AGREEMENT BETWEEN APPLICATION DETAIL RECORDS AND THE "B" RECORD MUST BE AT THE DISTRICT CODE LEVEL. THIS IS TRUE EXCEPT FOR OFFICE CODE SITUATIONS, WHICH REQUIRES AGREEMENT AT THE FOUR-DIGIT DDPP LEVEL).

B13:	WARNING - TRANSMITTED MID INVALID

INPUT ISO COUNTRY CODE OR PROVINCE CODE FIELD DOES NOT EXIST ON THE COUNTRY CODE DATABASE. ALSO, IF THE FILER'S TRANSMITTED MID, $4 REC, POS 57-71, IS INCORRECT (LESS THAN 7 CHARACTERS, MORE THAN 8 ALPHA CHARACTERS WITHOUT A NUMBER), THIS MESSAGE WILL BE GENERATED.

CBB:	STATE/ZIP MISMATCH

THE STATE CODE AND ZIP CODE CAN BE SENT IN MANY APPLICATIONS IN ABI. A ZIP FILE EXISTS TO CHECK THE FIRST THREE DIGITS OF THE CODE AGAINST THE STATE CODE GIVEN. IF IT DOES NOT MATCH, THIS ERROR MESSAGE RESULTS.

VL9:	DRAWBACK CLAIMANTID INVALID

THIS ERROR MESSAGE INDICATES THAT THE FORMAT OF THE DRAWBACK CLAIMANT ID IS NOT A VALID IRS/SS/CUSTOMS ASSIGNED NUMBER FORMAT. VALID IRS FORMAT IS NN-NNNNNNNXX (WHERE 'XX'=SUFFIX); SS IS NNN-NN-NNNN; CUSTOMS ASSIGNED NUMBER IS YYDDPP-NNNNN.

VND:	OGA/LINE RLSE CANNOT BE INDICATED

THIS ERROR MESSAGE OCCURS WHEN A FILER SENDS A "1" IN REC 10, POS 80 TO INDICATE THAT THE ENTRY SUMMARY CONTAINS FDA DATA FOR AN ENTRY RELEASE THROUGH LINE RELEASE AND THE ENTRY IS NOT A LINE RELEASE ENTRY.

889:	INVALID DATE OF PRESENTATION

THIS MESSAGE IS GENERATED IN RESPONSE TO A CARGO RELEASE DATA INPUT TRANSACTION. IF THE FILER ELECTS TO USE A DATE OF PRESENTATION (H2 REC, POS 23) THE "PRESENTATION DATE" MUST BE TRANSMITTED IN THE H1 REC, POS 50-55. THE DATE MUST BE IN MMYYDD FORMAT. IF THE DATE IS TRANSMITTED IN ANY OTHER FORMAT, OR IF THE DATE FIELD IS LEFT BLANK, THIS ERROR MESSAGE WILL BE GENERATED.

EJX:	UNITS MUST BE IN ORDER

THIS MESSAGE IS GENERATED IN RESPONSE TO AN AUTOMATED INVOICE TRANSMISSION (APPLICATION CI). SHIPPING UNIT IDENTIFICATIONS CAN BE MADE AT TWO LEVELS, IN THE C06/C07 RECORD AND/OR THE C47/C49 RECORDS. IN EITHER CASE, THE OUTER SHIPPING UNIT (USUALLY A CONTAINER) IS IDENTIFIED IN THE C06 RECORD. IF INTERIOR PACKAGING ENTITIES ARE SEPARATELY IDENTIFIED WITHIN A CONTAINER, THOSE IDENTIFIERS ARE REPORTED IN THE C07/C49 REC. EACH OF THESE RECORDS PROVIDES SPACE TO REPORT ONE OR TWO INTERIOR PACKAGING UNIT IDENTIFIERS (OR A RANGE OF IDENTIFIERS). THE INTERIOR PACKAGING IDENTIFERS MUST BE UNIQUE AND MUST BE REPORTED IN ORDER. THAT IS, THE C07 REC, POS 4-20, IS USED TO REPORT THE FIRST PACKAGING IDENTIFIER. THE NUMBER IN THIS FIELD MUST BE DIFFERENT FROM THE UNIT IDENTIFIER IN POS 21-37. FURTHER, DATA CANNOT BE TRANSMITTED IN POS 21-37 UNLESS POS 4-20 IS USED FIRST. WHEN REPORTING RANGES, THE NUMBER OF DIGITS IN THE HIGHEST RANGE MUST BE FOLLOWED FOR ALL RANGES (USE 0001 TO 0800 IF THE HIGHEST NUMBER IN THE RANGE IS 4000, NOT 1 TO 800, 801 TO 1600, FOR EXAMPLE).

AAI:	MFR ID OR SHIPPER ID REQUIRED

A MANUFACTURER OR SUPPLIER CODE IDENTIFIES THE MANUFACTURER OR SUPPLIER. REFER TO CUSTOMS DIRECTIVE 3500-13, DATED NOVEMBER 24, 1986, FOR COMPLETE INSTRUCTIONS ON DETERMINING THE MANUFACTURER/SUPPLIER CODE.

VDE:	INCORRECTLY ESTIMATED MPF SURCHRG

THE CORRECT MPF SURCHARGE FEE IS $3.00 USING COLLECTION CLASS CODE "500".THIS FEE IS REPORTED IN ABI RECORDS 34, 89 AND 90.

353:	ENTRY ALREADY LIQUIDATED

THIS MESSAGE OCCURS IN THE "REVISED FILER DATE" (DN) TRANSACTION WHEN A FILER TRANSMITS A REVISED ENTRY DATE FOR AN ENTRY THAT IS LIQUIDATED.

95T:	52 REC - 'CN' SWPM IND INVALID

THE REQUIRED SOLID WOOD PACKING MATERIAL INDICATOR MUST BE '1' OR '2'.

VHL:	DT HS7: APP LTR/ORD CERT REQ'D

IF BOX 2B, 06, 07, OR 12 (REC DT01, POS 8-9), IS USED, THEN POSITION 35 OF DT01 RECORD MUST REFLECT A "Y". NO OTHER BOX NUMBER WILL BE ACCEPTED WITH "Y" IN POS 35, HOWEVER.

EIT:	LOCATION CODE REQUIRED

THIS MESSAGE IS GENERATED IN RESPONSE TO AN AUTOMATED INVOICE TRANSMISSION (APPLICATION CI). THE C13 REC, POS 11-15, PROVIDES A FIELD FOR THE IDENTIFICATION OF A CODED LOCATION. THE DATA IN THIS ELEMENT DEPENDS ON THE LOCATION CODE IDENTIFIER, TRANSMITTED IN THE C13 REC, POS 9-10.IF THERE IS A VALID LOCATION CODE IDENTIFIER TRANSMITTED IN POS 9-10, THE CODED LOCATION CANNOT BE BLANK OR THIS MESSAGE WILL BE GENERATED. THIS MESSAGE APPLIES TO THE C43 RECORD, AS WELL.

DKR:	TOTAL CANADA DUTY AMOUNT INVALID

THE TOTAL CANADIAN DOLLAR DUTY AMOUNT GIVEN IN THE D90 RECORD DOES NOT ADD TO THE SUM OF THE CANADIAN DOLLAR DUTY FROM THE INDIVIDUAL D50 RECORDS.

BR6:	RECON INTEREST MISMATCH (R91:R20)

THE TOTAL RECON INTEREST GIVEN BY THE FILER IN THE 'R91' RECORD DOES NOT MATCH THE TOTAL INTEREST REFLECTED BY THE SUM OF THE 'R20' RECORD INTEREST AMOUNT THIS ONLY APPLIES TO ENTRY-BY-ENTRY RECONCILIATION.

486:	INVALID CONSIGNEE NUMBER FORMAT

CONSIGNEE NUMBERS TRANSMITTED TO ABI MUST BE IN ONE OF THE FOLLOWING FORMATS:  IRS OR EIN NUMBER: NN-NNNNNNNXX SSN: NNN-NN-NNNN CUSTOMS ASSIGNED NUMBER: YYDDPP-NNNNN N = NUMERIC CHARACTER; X = ALPHANUMERIC CHARACTER (EXCEPT FOR THE LETTERS "O", "I", "Z"); YY= LAST TWO DIGITS OF THE CALENDAR YEAR IN WHICH THE NUMBER WAS ASSIGNED. ANY OTHER FORMAT THAN ONE OF THE ABOVE WILL BE REJECTED WITH THIS MESSAGE.

 Next 10 >>Showing results 1 to 25 of 1405