ABI Error Message

VK6:	HLS: BMS MAP FIELD NAME REQUIRED

A BMS MAP FIELD NAME OPERAND IS REQUIRED WITH OPERAND 'M'

01G:	ENTRY# NOT LESS THAN 50000000

THE NEW ENTRY NUMBER FOR THE FIRST 5 YEARS MUST BE LESS THAN 50000000.

56G:	ISSUER CODE/MOT CONFLICT

IN THE CARGO RELEASE DATA INPUT TRANSACTION, APPLICATION HI, THE MODE OF TRANSPORTATION (H1 REC, POS 32-33) MUST AGREE WITH THE CODE REPRESENTING THE IMPORTING CARRIER. (H1 REC, POS 70-73). FOR AIR SHIPMENTS USING MOT 40, THE ISSUER CODE IS NOT USED AND MUST BE BLANK. IF THE ISSUER CODE FIELD IS NOT BLANK, THIS ERROR MESSAGE WILL RESULT. FOR MOT 20 OR 30, THE ISSUER CODE FIELD IS IGNORED.

VNR:	CLAIM DTE OVER 30 DAYS IN FUTURE

IN THE DRAWBACK MODULE THIS MESSAGE INDIACTES THAT THE DATE IS IN A VALID FORMAT, BUT IS GREATER THAN 30 DAYS IN THE FUTURE. FUTURE DATES ARE NOT ACCEPTED FOR THE DISKETTE PROGRAM. DATES UP TO 30 DAYS IN ADVANCE ARE ACCEPTED VIA ABI. FOR ABI TRANSMISSIONS, MESSAGE VLZ WILL BE USED IF OVER 30 DAYS IN ADVANCE.EN A SUCCESSFUL ACKNOWLEDGEMENT IS RECEIVED FROM ABI SHOULD THE ACH PAYMENT BE TRANSMITTED.

RBL:	RECON EXISTS - REPLACE OR DELETE

THE RECON ALREADY EXISTS ON CUSTOMS FILE AND THE FILER HAS ATTEMPTED AN 'A' TRANSACTION. FILER MUST PERFORM AN 'R' IF THE RECON IS ALREADY IN CUSTOMS STATUS, OR IS IN REJECTED STATUS. IF THE RECON ENTRY IS STILL IN ABI STATUS, THE FILER MAY TRANSMIT A 'D' TO DELETE THE RECON. NOTE: IF THIS ERROR MESSAGE IS RECEIVED, OFTEN THE FILER WILL ALSO RECEIVE ERROR MESSAGE BRH 'OTHER RECON ALREADY ON FILE' FOR ALL THE ASSOCIATED IMPORT ENTRIES. CORRECTING ERROR RBL WILL ALSO CORRECT ERROR BRH.

VBH:	FW 3-177: INVLD US IMPORT PERMIT#

IF THE PERMIT # IS TRANSMITTED IN REC FW02, POS 53-60, IT MUST HAVE A MINIMUM OF SIX CHARACTERS AND NO MORE THAN 8 CHARACTERS. (NOTE: THIS PERMIT IS ISSUED BY THE FISH AND WILDLIFE SERVICE HEADQUARTERS OFFICE FOR THE IMPORTATION OF THREATENED OR ENDANGERED SPECIES FOR WHICH COMMERCIAL TRADE IS PROHIBITED.)

RBP:	RECON DDPP MUST = B REC DDPP

THE PORT CODE OF THE RECONCILIATION SUMMARY IN THE 'R10' RECORD MUST MATCH PROCESSING PORT CODE GIVEN IN THE ABI 'B' RECORD.

VMB:	HLO: SORT SEQUENCE NUMBER INVALID

SORT SEQUENCE NUMBERS MUST BE UNIQUE ASCENDING VALUES STARTING FROM 01 AND ENDING WITH THE NUMBER OF SORT FIELDS.

VL9:	DRAWBACK CLAIMANTID INVALID

THIS ERROR MESSAGE INDICATES THAT THE FORMAT OF THE DRAWBACK CLAIMANT ID IS NOT A VALID IRS/SS/CUSTOMS ASSIGNED NUMBER FORMAT. VALID IRS FORMAT IS NN-NNNNNNNXX (WHERE 'XX'=SUFFIX); SS IS NNN-NN-NNNN; CUSTOMS ASSIGNED NUMBER IS YYDDPP-NNNNN.

ADJ:	ISSUER CODE REQUIRED

THIS MESSAGE IS GENERATED DURING ENTRY SUMMARY TRANSACTIONS. IF THE MOT IS 10 OR 11, AND THE ISSUER CODE OF THE MASTER BILL OF LADING REPORTED IN THE 22 RECORD, POSITIONS 70-73, IS SPACES, THIS ERROR WILL RESULT. WHEN THIS FIELD IS SPACES AND THE MOT IS 20, 30 OR 40, NO ERROR MESSAGE WILL BE GENERATED.

99H:	ENTRY/BOND TYPE REQUIRES C/O 'CA'

FOR ENTRY TYPE '23', AND BOND TYPE OF '0' OR SPACE REQUIRES COUNTRY OF ORIGIN OF 'CA'.

0JN:	FIRMS CODE REQUIRED

ENTRIES WHICH REQUEST CARGO SELECTIVITY PROVISIONAL RESULTS MUST CONTAIN A FIRMS CODE WHICH IS "ACTIVE" AND WHICH REPRESENTS A VALID CARGO EXAMINATION SITE. (NOT A CUSTOMS ADMINISTRATIVE SITE). IF THE FIRMS CODE, FROM THE FIRMS FILE DATABASE, IS NOT ACTIVE, THE INPUT TRANSACTION WILL BE REJECTED WITH THIS ERROR MESSAGE.

VEK:	FC 740:MODEL/TYPE NBR REQ

A MODEL OR TYPE NUMBER CODE IS REQUIRED TO BE SENT IN THE FC01 RECORD, POSITIONS 58-74.

APR:	WITHDRAWAL REQ. NOT APPLIC.

A REQUEST TO WITHDRAW A PROTEST, CLAIM OR INTERVENTION, INDICATED BY 'W', MAY BE SUBMITTED AT ANY TIME UNTIL THE PROTEST OR PETITION IS ADJUDICATED BY CUSTOMS. THE PROTEST HAS ALREADY BEEN ADJUDICATED, OR THIS IS A DUPLICATE REQUEST TO WITHDRAW. FULL FILE QUERY REQUEST WILL SHOW IF REQUEST ALREADY HAS BEEN MADE.

07D:	IMPORTER NUMBER MISSING

THIS ERROR MESSAGE OCCURS IN THE BORDER CARGO RELEASE (HN) TRANSACTION WHEN THE FILER LEAVES THE IMPORTER OF RECORD (POSITIONS 21-32 OF THE 01 RECORD) FIELD BLANK.

8WD:	MOT NOT ORIG 10/11/20/21/40/41

THIS MESSAGE IS USUALLY GENERATED IN RESPONSE TO A BILL OF LADING UPDATE TRANSACTION (APPLICATION LN). THIS APPLICATION IS LIMITED TO ENTRIES WHICH REPORT MODES OF TRANSPORTATION OF OCEAN (MOT = 10/11/12), RAIL (MOT = 20/ 21), OR AIR (MOT = 40/41). ENTRIES WHICH REPORT OTHER MODES OF TRANSPORTATION CANNT BE CORRECTED BY THE USE OF BILL OF LADING UPDATE. THE MODE OF TRANSPORTATION FOR AN ENTRY CAN BE DETERMINED BY THE PF4 KEY FROM THE ON-LINE SELECTIVITY FUNCTION. INCORRECT MODES OF TRANSPORTATION MUST BE CORRECTED BY CUSTOMS (THEY CANNOT BE CHANGED BY THE USE OF THE BILL OF LADING UPDATE APPLICATION).

B24:	LOWER CASE LETTERS FIRM/ADDR/CITY

FIRM NAME FIELD, ADDRESS FIELD, OR CITY NAME FIELD CONTAINS LOWER CASE ETTERS. IN ABI TRANSACTIONS, FILERS SHOULD ALWAYS SUBMIT UPPER CASE ALPHA CHARACTERS. IF THEIR SYSTEM SENDS LOWER CASE LETTERS IN EITHER THE FIRM NAME OR CITY FIELDS, THIS MESSAGE WILL BE GENERATED.

VNY:	CLAIM DUTY CANNOT EXCEED PAID

THIS DRAWBACK MODULE ERROR MESSAGE MEANS THAT THE AMOUNT OF DUTY CLAIMED AGAINST THE IMPORT FOR THIS DRAWBACK CLAIM EXCEEDS THE TOTAL DUTY ORIGINALLY AVAILABLE FOR THE ENTRY. THESE ERRORS WILL OCCUR IF THE IMPORT ENTRY IS BEING DESIGNATED FOR DRAWBACK FOR THE FIRST TIME AND THE CLAIMED DUTY AMOUNT EXCEEDS THE ORIGINAL AVAILABLE AMOUNT, OR IF THE CLAIM IS A TYPE '46' AND THE CLAIMED DRAWBACK EXCEEDS THE CURRENT AVAILABLE DUTY. NOTE: THERE ARE OTHER ODD CONDITIONS WHERE THE MESSAGE WILL OCCUR DUE TO NO FAULT OF THE FILER. IF THE FILER INDICATES THAT MORE MONIES WERE PAID THAN ARE REFLECTED IN ACS (E.G. SUPPLEMENTAL DUTIES ON A VOULUNTARY TENDER FOR ASSISTS WAS TENDERED, BUT THE COLLECTION WAS NOT POSTED TO THE ENTRY), THE FILER SHOULD BE INSTRUCTED TO DESIGNATE THE ADDITIONAL MONIES ON CM 999999/9900. THIS CM WAS CREATED JUST FOR THIS TYPE OF CONDITION.

17L:	APPLICATION NOT AVAILABLE

THE APPLICATION CONTROL RECORD IN THE APPLICATION CONTROL FILE IS SET TO "OFF". ACTION: RESTART THE APPLICATION AFTER THE ENABLE SWITCH IN THE FILE IS SET TO "ON" OR THE CORRECT APPLICATION CODE IS SELECTED.

8WC:	ENTRY NOT ORIGINALLY ABI

THIS MESSAGE IS GENERATED IN RESPONSE TO A BILL OF LADING UPDATE TRANSACTION (APPLICATION LN). THE ONLY DATA THAT MAY BE UPDATED VIA BILL OF LADING UPDATE TRANSACTIONS ARE THOSE THAT WERE ORIGINALLY ESTABLISHED BY INPUT FROM ABI. IF THE FILER SENDS THE APPLICATION ON A NON-ABI ENTRY, THIS ERROR MESSAGE WILL BE ISSUED.

LU3:	LUMBER PERMIT NOT ALLOWED

THE SOFTWOOD LUMBER AGREEMENT BETWEEN CANADA AND THE UNITED STATES REQUIRES A SOFTWOOD LUMBER PERMIT NUMBER FOR LUMBER MILL PRODUCTS CLASSIFIED IN SUBHEADINGS 4407.10.00, 4409.10.10, 4409.10.20 AND 4409.10.90 THAT WERE "FIRST MANUFACTURED" INTO A PRODUCT IN THE CANADIAN PROVINCES OF XO, XQ, XC OR XA. THE LUMBER PRODUCT MUST MEET BOTH CRITERIA, TARIFF NUMBER AND PROVINCE. THE LUMBER PERMIT NUMBER IS SENT IN POSITIONS 57-65 OF THE 51 RECORD.THIS MESSAGE OCCURS WHEN A LUMBER PERMIT NUMBER IS SENT FOR A TARIFF NUMBER THAT IS NOT IN THE ABOVE NAMED SUBHEADINGS OR FOR A TARIFF NUMBER IN THE SUBHEADINGS BUT NOT FROM ONE OF THE FOUR NAMED PROVINCES. THE ERROR MESSAGE IS SENT WITH THE 50 RECORD NOT THE 51 RECORD.

AQW:	FAX INDICATOR REQUIRED

THE FAX INDICATOR CANNOT BE BLANK.

G9C:	REMOTE ENTRY/ENTRY TYPE CONFLICT

IF THE B RECORD REMOTE ENTRY INDICATOR IS A '1',THE ENTRY TYPE CODE MUST BE EITHER 01 OR 11.

ARY:	NOTIFY DP/FLR/OFFICE INVALID

THE DDPP/FILER CODE/OFFICE CODE COMBINATION IS INVALID, OR HAS BEEN TRANSMITTED IN THE WRONG POSITIONS OF THE P50 RECORD.

8WE:	15-DAY UPDATE TIME LIMIT EXCEEDED

FILERS WHO USE THE BILL OF LADING UPDATE TRANSACTION (APPLICATION LN) TO CORRECT VARIOUS ELEMENTS OF THE SELECTIVITY RECORD PREVIOUSLY ESTABLISHED BY ABI INPUT HAVE A 15 CALENDAR DAY TIME LIMIT IN WHICH TO TRANSMIT THE UPDATE TRANSACTION. THE 15 DAYS IS MEASURED AGAINST THE LATEST OF THE FOLLOWING ACTIONS: ESTIMATED ARRIVAL DATE, ACTUAL ARRIVAL DATE, AND/OR RELEASE DATE.

 Next 10 >>Showing results 1 to 25 of 1405