ABI Error Message

AHY:	ADMIN CAN'T BE 'N' FOR THIS FILER

IF AN ABE RECORD IS FOR A 'DP-SITE' THE ADMINISTRATIVE MESSAGE OPTION CANNOT BE SET TO 'N'. IT MUST EITHER BE SET TO 'Y' OR 'S'.

14L:	VALUE/RANGE ERROR FOR TARIFF NBR

ENTERED VALUE IS NOT IN THE RANGE FOR THIS TARIFF NBR IN THE TARIFF DATABASE.

2C3:	INVALID BOND

CONVERTED BOND TYPE 2: * MAY BE ON FILE BUT NOT FOR THE PORT OF ENTRY AND NOT ON FILE AT A CROSS DDPP OF THE PORT OF ENTRY FOR THE IMPORTER OR ITS PARENT (IF APPLICABLE), * IS ON THE FILE BUT DOESN'T COVER THE DATE OF THE ENTRY DOESN'T AGREE WITH THE BOND TYPE THAT IS ON FILE. CONVERTED BOND TYPE 5: * IS NOT ON FILE FOR THE IMPORTER OR ITS PARENT COMPANY * IS ON THE FILE BUT DOESN'T COVER THE DATE OF THE ENTRY BOND TYPE 8: * THE BOND THAT IS ON FILE IS NOT A VALID CONTINUOUSBOND THAT IS APPROPRIATE FOR THE ENTRY TYPE. FOR BOND TYPE 8, IF THE BOND IS NOT ON FILE ON THE DATE USED FOR BOND VALIDATION (CARGO REL DATE, PAY DUE DATE, ETC) IN THE SUMMARY INPUT, THIS ERROR MESSAGE WILL RESULT. THIS WILL ALSO APPLY TO ENTRIES WITH A BOND THAT IS NOT EITHER A 1 OR 1A1 TYPE BOND IN THE BNDL FILE.

VHP:	DT HS7: INVAL CONTRACT/STMNT CERT

ONLY A "Y" IS PERMITTED IN REC DT01, POS 36 TO INDICATE THE PRESENCE OF THE IMPORTERS SUBSTANTIATING STATEMENT/CONTRACT/OR MANUFACTURER'S CONFIRMATION LETTER. ANY OTHER CHARACTER WILL RESULT IN THIS ERROR MESSAGE.

AP0:	SECURITY VIOLATION!!

BOTH A VALID CUSTOMS ASSIGNED PROTEST NUMBER AND THE CORRESPONDING FILER ASSIGNED REFERENCE NUMBER ARE REQUIRED TO FILE AMENDMENTS, ADDENDA, OR SERVICE REQUEST FOR EXISTING PROTESTS! THE FILER REFERENCE NUMBER SUBMITTED DOES NOT CORRESPOND TO THE PROTEST NUMBER.

AQV:	INT. ADVICE NBR NOT ON FILE

NO MATCH HAS BEEN FOUND FOR THE INTERNAL ADVICE NUMBER LISTED, OR HAS NOT YET BEEN ENTERED INTO ACS BY THE CIE IN NY OR ORR AT HQS.

28M:	DATA NOT DELETED IN TEST MODE

THIS ERROR MESSAGE OCCURS IN THE AII MODULE. THE DATA BASE IS UNAFFECTED BY A DATA TRANSMISSION BECAUSE THE SENDER'S STATUS WAS "TEST" FOR AII.

EJV:	INBOX IND MUST BE 'R' OR SPACE

THIS ERROR MESSAGE IS GENERATED IN RESPONSE TO AN AUTOMATED INVOICE TRANSACTION (APPLICATION CI). THE C01 REC, POS 56, PROVIDES THE FILER AN OPPORTUNITY TO INDICATE IF THE INVOICE BEING TRANSMITTED IS AN INITIAL INPUT (SPACE FILL THE POSITION) OR IS IN RESPONSE TO AN ABI REJECTION FROM CUSTOMS WHICH REQUESTED THE TRANSMISSION OF THE INSTANT INVOICE. IN THE LATTER CASE, THE ACCEPTABLE VALUE FOR THIS FIELD IS "R". ANY OTHER CHARACTER TRANSMITTED IN THIS FIELD WILL GENERATE THIS ERROR MESSAGE.

ADW:	MOT MISMATCH ON CONSL RELEASE

THE MOT'S (MODE OF TRANSPORTATION) MUST BE THE SAME FOR ALL OF THE RELEASES ON A CONSOLIDATED ENTRY.

79M:	TARIFF NBR NOT ON DATABASE

TARIFF NBR IS NOT FOUND ON EITHER THE HARMONIZED DATABASE. THE MOST COMMON CAUSE FOR THIS ERROR MESSAGE IS THAT A RECENT CHANGE TO THE TARIFF NUMBER HAS OCCURRED AND THE FILER HAS NOT RETRIEVED THE CHANGE. FILERS MUST KEEP UP WITH ALL HARMONIZED UPDATES IN ORDER TO KNOW WHICH TARIFF NUMBERS ARE VALID. IF THE TARIFF NUMBER RECEIVING THIS MESSAGE IS NO LONGER VALID, THE FILER SHOULD DO A HARMONIZED RANGE QUERY THROUGH ABI AND SHOULD EXAMINE THE DESCRIPTION RECORDS OF THE TARIFF NUMBERS RETURNED IN THE QUERY RESULTS TO DETERMINE WHICH TARIFF NUMBER IS THE REPLACEMENT FOR THE REJECTED TARIFF NUMBER.

AQ2:	TEAM CODE REQUIRED

EACH PROTEST, PETITION, INTERVENTION MUST BE ADDRESSED TO A TEAM/OFFICE AT THE CUSTOMS SERVICE PORT WHERE IT IS BEING FILED. THE ADDRESS TEAM FIELD IS BLANK.

APV:	SAMPLE IND. CANNOT CHANGE

NOTIFICATION TO CUSTOMS THAT A SAMPLE HAS BEEN SENT, INDICATED BY 'S', MAY BE SUBMITTED BY FILER AT ANY TIME PRIOR TO ADJUDICATION OF PROTEST OR CLAIM BY CUSTOMS. 'N' INDICATES THAT A SAMPLE DOES NOT APPLY. ONCE SET TO 'S' THE SAMPLE INDICATOR CANNOT BE UN-SET TO 'N'.

EJP:	NBR SHIP/PACKING UNITS INCORRECT

THIS MESSAGE IS GENERATED IN RESPONSE TO AN AUTOMATED INVOICE TRANSACTION (APPLICATION CI). THE NUMBER OF EXTERIOR SHIPPING UNITS (USUALLY KNOWN AS CONTAINERS) IS REPORTED IN THE C05 REC, POS 4-18.THERE MUST BE A C06 RECORD FOR EACH SHIPPING UNIT REPORTED IN THE C05 RECORD. THUS, IF THE FIGURE IN POS 4-18 OF THE C05 REC IS "25", THERE MUST BE 25 C06 RECORDS TRANSMITTED, EACH OF WHICH WOULD IDENTIFY ONE OF THE 25 SHIPPING UNITS FOR THE INVOICE. IF THE NUMBER OF C06 RECORDS DOES NOT AGREE WITH THE NUMBER REPORTED IN THE C05 RECORD, THIS ERROR MESSAGE WILL BE GENERATED.

BRI:	BOND NUMBER NOT SAME

THE BOND NUMBER ON ALL IMPORT ENTRIES ASSOCIATED WITH A GIVEN RECONCILIATION SUMMARY (TYPE '09' ENTRY) MUST BE THE SAME. THE BOND MUST BE AN ACTIVITY CODE '1' OR '1A1' BOND. NOTE: IF THIS ERROR MESSAGE OCCURS IN CONJUNCTION WITH ERROR 8PN, THIS MESSAGE MAY NOT BE RELEVANT TO THE ENTRY IN QUESTION. FOR MORE INFORMATION, SEE ERRS 8PN. NOTE: THIS MESSAGE WILL ALSO OCCUR IF MESSAGE 0AA (ENTRY NOT FOUND- MEANING THAT THE ENTRY IN THE IDENTIFIED R20 RECORD IS NOT IN ACS) IS GENERATED. MESSAGE 95I WILL USUALLY OCCUR IN CONJUNCTION WITH MESSAGE 0AA, AS WELL.

VGP:	FD 701: VALUE MUST BE > 0

THE FDA VALUE IN REC FD03, POS 5-15, MUST BE MORE THAN ZERO. BLANKS ARE PERMITTED.

EJU:	ITEM AMT MUST=UNIT PRCXNO PRC UNT

THIS MESSAGE IS GENERATED IN RESPONSE TO AN AUTOMATED INVOICE TRANSACTION (APPLICATION CI). THE C33 RECORD ENABLES THE FILER TO REPORT NUMBER OF ITEMS IMPORTED, COST PER ITEM AND TOTAL COST FOR THE ITEM, AMONG OTHER ELEMENTS. IF THE NUMBER OF PRICING UNITS, WHEN MULTIPLIED BY THE PRICE PER UNIT, DOES NOT EQUAL THE "ITEM AMOUNT" TOTAL, REPORTED IN POS 37-51 OF THIS RECORD, THIS ERROR MESSAGE WILL BE GENERATED. THE FIGURE SENT TO ABI CAN VARY BY UP TO, BUT NOT OVER, $1 (PLUS OR MINUS) FROM THE CALCULATED AMOUNT FOR "ITEM AMOUNT" TO BE ACCEPTABLE TO ABI.

94P:	UNABLE TO LOCATE BGM SEGMENT

EDIFACT SYNTAX ERROR. THE BGM (BEGINNING OF MESSAGE) SEGMENT IS MISSING.

95R:	HLD REC ON FILE - 'D' NOT ALLOWED

THIS MESSAGE IS GENERATED WHEN A FILER ATTEMPTS TO TRANSMIT AN ENTRY SUMMARY TRANSACTION (APPLICATION EI) FOR AN ENTRY NUMBER WHICH HAS A LIQUIDATION HOLD ON FILE. HOLDS CAN BE PLACED PRIOR TO THE HARDCOPY DOCUMENTS BEING TENDERED TO CUSTOMS, AND, IF THIS OCCURS, THE ABI FILER CANNOT SUBSEQUENTLY TRANSMIT A 10D INPUT TO REMOVE THE SUMMARY DATA FROM ACS. IF THEY MAKE SUCH AN ATTEMPT, THIS MESSAGE WILL BE GENERATED.`

ABX:	BROKER NOT AUTHORIZED FOR REQUEST

A BROKER HAS REQUESTED INFORMATION THAT MAY BE ON FILE, BUT IS NOT ASSIGNED ITS FILER CODE. FOR RECONCILIATION ENTRIES, THIS MESSAGE INDICATES THAT THE FILER IS NOT A STATEMENT FILER IN THE PORT OF PROCESS. RECONCILIATION ENTRIES MUST BE PAID VIA STATEMENT PROCESSING, THUS THE FILER WILL GET THIS REJECT MESSAGE UNTIL HIS PROFILE RECORD REFLECTS OPERATIONAL STATUS FOR STATEMENT PROCESSING.

DKK:	NAFTA CLAIM - CANADIAN DATA REQD

THIS IS A DRAWBACK MODULE MESSAGE. FOR DRAWBACK DISKETTE, THE NAFTA INDICATOR WAS SET TO 'Y' IN THE 'CH' HEADER RECORD, OR FOR ABI, IT WAS SET TO '1'. EITHER WOULD INDICATE THAT THIS CLAIM IS A NAFTA CLAIM SUBJECT TO THE "LESSER OF" RULE. ACCORDINGLY, WE MUST HAVE THE NAFTA CNTRY IMPORT ENTRY DATA IN THE 'CI' (DISKETTE) OR 'D50' (ABI) RECORD(S) IF THE CLAIM TYPE IS '41' OR '44'. IF THE CLAIM TYPE IS '42' OR '45', THE NAFTA CTRY IMPORT ENTRY DATA WILL BE CONSIDERED OPTIONAL BY ACS, BUT THAT DOES NOT RELIEVE THE FILER OF THE STATUTORY REPORTING REQUIREMENT IF NAFTA IS APPLICABLE.

VNZ:	CLAIM TAX CANNOT EXCEED PAID

THIS DRAWBACK MODULE ERROR MESSAGE MEANS THAT THE AMOUNT OF TAX CLAIMED AGAINST THE IMPORT FOR THIS DRAWBACK CLAIM EXCEEDS THE TOTAL TAX ORIGINALLY AVAILABLE FOR THE ENTRY. THESE ERRORS WILL OCCUR IF THE IMPORT ENTRY IS BEING DESIGNATED FOR DRAWBACK FOR THE FIRST TIME AND THE CLAIMED TAX AMOUNT EXCEEDS THE ORIGINAL AVAILABLE AMOUNT, OR IF THE CLAIM IS A TYPE '46' AND THE CLAIMED DRAWBACK EXCEEDS THE CURRENT AVAILABLE TAX. NOTE: THERE ARE OTHER ODD CONDITIONS WHERE THE MESSAGE WILL OCCUR DUE TO NO FAULT OF THE FILER. IF THE FILER INDICATES THAT MORE MONIES WERE PAID THAN ARE REFLECTED IN ACS (E.G. SUPPLEMENTAL DUTIES ON A VOULUNTARY TENDER FOR ASSISTS WAS TENDERED, BUT THE COLLECTION WAS NOT POSTED TO THE ENTRY),THE FILER SHOULD BE INSTRUCTED TO DESIGNATE THE ADDITIONAL MONIES ON CM 999999/9900. THIS CM WAS CREATED JUST FOR THIS TYPE OF CONDITION

VPG:	CLAIM TYPE INVALID

THIS MESSAGE OCCURS IN THE NAFTA DUTY DEFERRAL MODULE. THE CLAIM TYPE INDICATOR IS SENT IN POSITION 4 OF THE D01 RECORD AND MUST EITHER BE A '1', '2' OR '3'.

07H:	EST ARRIVAL DATE NOT IN RANGE

THE ESTIMATED ARRIVAL DATE ENTERED IS NOT WITHIN THE RANGE ALLOWED. VALID DATES INCLUDE: 1) TODAY'S DATE, 2) ANY DATE UP TO 30 DAYS IN THE PAST, 3) ANY DATE UP TO 5 DAYS IN THE FUTURE.

79I:	MANUFACTURER NUMBER NOT ON FILE

THE MANUFACTURER NUMBER USED IN THE ABI SELECTIVITY TRANSACTION DOES NOT EXIST IN THE MANUFACTURER FILE. THIS IS A WARNING MESSAGE ONLY. IT WILL BE FOLLOWED BY THE '42F' "DATA ADDED WITH WARNINGS" MESSAGE.

01C:	RELATED PARTY IND. MUST BE Y OR N

THIS MESSAGE WILL BE GENERATED IF THE 50 REC, POS 77 DOES NOT REFLECT EITHER A "Y" OR AN "N" IN THE FILER'S TRANSMISSION OF THE ENTRY SUMMARY DATA (APPLICATION EI).

 Next 10 >>Showing results 1 to 25 of 1405