Automated Manifest Sytstem (AMS)


ABI Error Message

EIC: INVALID PAYMENT TERMS TYPE

THIS MESSAGE IS GENERATED IN RESPONSE TO AN AUTOMATED INVOICE TRANSMISSION (APPLICATION CI). PAYMENT TERMS MUST BE TRANSMITTED IN THE C02 REC, POS 6-75. EACH PAYMENT TERMS FIELD HAS A TWO CHARACTER "PAYMENT TERMS TYPE", WHICH MUST BE TRANSMITTED IN THE C02 REC, POS 4-5. THE LIST OF VALID PAYMENT TERMS TYPES IS ON PAGE AII-8 OF THE CATAIR. THE USE OF ANY OTHER CODE, OR A BLANK FIELD, IN THIS ELEMENT WILL GENERATE THIS ERROR MESSAGE
VQI: ADD PAYABLE AMOUNT INVALID

THIS ERROR MESSAGE OCCURS IN THE NAFTA DUTY DEFERRAL MODULE. THE TOTAL PAYABLE ANTIDUMPING DUTY IS SENT IN THE D31 RECORD, POSITIONS 15-25. THE ANTIDUMPING DUTY BLOCK IS IN THE D11 RECORD, POSITIONS 14-23. IF THE ANTIDUMPING BONDED DUTY INDICATOR IN THE D11 RECORD, POSITION 39 IS '0' (ADD IS NOT BONDED) THEN THE TOTAL PAYABLE ANTIDUMPING DUTY AMOUNT CANNOT BE SPACES.
EJ2: PACKAGING UNITS MUST BE UNIQUE

THIS MESSAGE IS GENERATED IN RESPONSE TO AN AUTOMATED INVOICE TRANSACTION (APPLICATION CI). THE C06 RECORD PERMITS THE REPORTING OF THE SHIPPING UNIT IDENTIFICATION (USUALLY A CONTAINER NUMBER). IF THE INVOICE CONTAINS MULTIPLE C06 RECORDS, THE SHIPPING UNIT IDENTIFIER IN EACH C06 RECORD MUST BE UNIQUE. THE SAME UNIQUENESS CRITERIA APPLIES TO PACKAGING UNIT IDENTIFIERS TRANSMITTED IN THE C07 RECORD.
2C0: BOND NOT IN EFFECT

A VALID BOND IS ON FILE, BUT IS NOT EFFECTIVE ON THE DATE OF THE QUOTA ENTRY. OR, IF NOT ABI, CHECK BOND TYPE ON ENTRY HEADER MASTER RECORD. IF (9), MUST "X" 'S.E.B.' ACS WILL NOT CHECK CONTINUOUS (301) BOND FILE.
27A: CENSUS IMPROBABLE COUNTRY

THIS MESSAGE IS AN ABI REPLY TO AN ENTRY SUMMARY (EI) INPUT TRANSACTION. IT INDICATES THAT THE DATA COLLECTED BY CENSUS DOES NOT INDICATE THAT THE TARIFF NUMBER FOR THE LINE IN QUESTION HAS NOT BEEN PREVIOUSLY REPORTED FROM THE TRANSMITTED COUNTRY OF ORIGIN. THE FILER SHOULD VERIFY THE COUNTRY OF ORIGIN AND/OR TARIFF NUMBER AND, IF NECESSARY, MAKE CORRECTIONS. IF THE DATA IS ACCURATE AS TRANSMITTED, NO FURTHER ACTION VIA ABI IS NECESSARY.
VK1: HLS: RELATIONAL OPERATOR INVALID

THE RELATIONAL OPERATOR CODE MUST BE ONE OF THE FOLLOWING: LT = LESS THAN LE = LESS THAN OR EQUAL TO EQ = EQUAL  GE = GREATER THAN OR EQUAL TO NE = NOT EQUAL NY = IS NULL NN = NOT NULL NV = NULL VALUE SP = STRING PRESENT SA = STRING ABSENT IG = IGNORE
40K: SPI INVALID FOR EXP COUNTRY

SPECIAL PROGRAM INDICATORS, LISTED IN THE CATAIR ON PAGES ENS-48 AND 49 MAY NOT BE VALID FOR ALL PROGRAMS FOR ALL COUNTRIES. FOR EXAMPLE, ECUADOR IS ELIGIBLE FOR THE ANDEAN PREFERENCE PROGRAM (SPI "J"), BUT IS NOT ELIGIBLE FOR THE CARRIBEAN PREFERENCE PROGRAM (SPI "E"). THEREFORE, AN ENTRY SUMMARY INPUT TRANSACTION THAT USED CODE "E" WITH ISO CODE "EC" AS THE COUNTRY OF EXPORT WOULD RECEIVE THIS ERROR MESSAGE.
0LK: VISA CATEGORY NUMBER INVALID

IF A TARIFF NUMBER IS SUBJECT TO QUOTA REPORTING OR MONITORING, IN MOST CASES A CATEGORY NUMBER WILL BE ASSOCIATED WITH THE TARIFF NUMBER. THE CATEGORY NUMBER CAN BE FOUND ON THE TARIFF FILE. WHEN AN ABI FILER TRANSMITS A TARIFF NUMBER THAT IS SUBJECT TO QUOTA-CLASS REPORTING, THE CATEGORY NUMBER MUST BE REPORTED IN THE 51 REC, POS 21-23. IF THE CATEGORY NUMBER IS OMITTED, THIS ERROR MESSAGE WILL RESULT. IN ADDITION, IF THE CATEGORY NUMBER FOR THE TARIFF NUMBER IN QUESTION IS NOT AN EXACT MATCH TO THE CATEGORY NUMBER FOUND ON THE HSA FILE, THIS ERROR MESSAGE WILL ALSO BE GENERATED. (CATEGORY NUMBERS, AS TRANSMITTED BY ABI FILERS, MUST BE THREE NUMERIC CHARACTERS).
79L: QUOTA-ENTRY SUMMARY REQUIRED

A MATCHING QUOTA RECORD EXISTS WITHOUT THE QM-TYPE = S 
VG6: INVALID ACTION CODE

THIS ERROR MESSAGE RESULTS WHEN A FILER ATTEMPTS TO QUERY AN FDA ESTABLISHMENT IDENTIFIER NUMBER (FEI) OR IS TRIES TO OBTAIN ONE AND IS USES AN INVALID ACTION CODE IN REC FD10, POS 5 OR IN REC FD20, POS 5 OF THE PP TRANSACTION. IN REC FD10, POS 5, ONLY A "Q" (QUERY) IS ALLOWED. IN REC FD20, POS 5, ONLY A "Q' (QUERY) OR "A" (ADD) IS ALLOWED.
95W: 52 REC - 'HK' SWPM IND INVALID

THE REQUIRED SOLID WOOD PACKING MATERIAL INDICATOR MUST BE '1' OR '2'. 
8P1: INELIGIBLE - CONSOLIDATED RLSE

THIS DRAWBACK MODULE ERROR MESSAGE WILL OCCUR IF AN IMPORT ENTRY IS DESIGNATED THAT WAS NOT AN ENTRY SUMMARY, BUT A CONSOLIDATED RELEASE. IN THESE CASES, THE ENTRY THAT SHOULD BE CITED, IF ANY, WOULD BE THE CONSOLIDATED SUMMARY AGAINST WHICH DUTIES/TAXES WERE PAID.
941: TAXES DO NOT MATCH

THE TAX AMOUNT TRANSMITTED IN THE 60 REC, POS 59-68 IS NOT AN EXACT MATCH TO THE TOTAL TAX TRANSMITTED IN THE 90 REC, POS 14-24.THIS MESSAGE APPLIES TO AN ENTRY SUMMARY TRANSACTION (APPLICATION EI), BUT THIS ERROR WILL NORMALLY BE FOUND IN THE EY OUTPUT RECORD AND THE ERROR MESSAGE NUMBER DOES NOT DISPLAY.
APN: VOIDANCE REQST NOT VALID

A REQUEST FOR VOIDANCE OF DENIAL, INDICATED BY 'R', MAY BE SUBMITTED WITHIN 90 DAYS AFTER PROTEST HAS BEEN DENIED BY CUSTOMS. THE VOIDANCE REQUEST INDICATOR IS ALREADY SET AT 'R' (AFFIRMATIVE FOR REQUEST), OR THE PROTEST IS NOT IN DENIED STATUS. 
77I: CONSIGNEE NUMBER NOT ALLOWED

IF A FILER TRANSMITS A "1" IN POSITION 75 OF THE H1 RECORD (HI APPLICATION) ABI WILL NOT SIMULTANEOUSLY ACCEPT A CONSIGNEE NUMBER IN THE H2 RECORD, POS 11-22. IF BOTH ARE TRANSMITTED, THIS ERROR MESSAGE WILL RESULT. 
VQJ: CVD BONDED AMOUNT INVALID

THIS ERROR MESSAGE OCCURS IN THE NAFTA DUTY DEFERRAL MODULE. THE TOTAL BONDED COUNTERVAILING DUTY IS SENT IN THE D31 RECORD, POSITIONS 37-47. IF THE COUNTERVAILING DUTY BONDED INDICATOR IN THE D11 RECORD, POSITION 75 IS '1' (CVD IS BONDED) THEN THE TOTAL BONDED COUNTERVAILING DUTY AMOUNT CANNOT BE SPACES.
EIZ: RELATED DOCUMENT NUMBER REQUIRED

THIS MESSAGE IS GENERATED IN RESPONSE TO AN AUTOMATED INVOICE TRANSMISSION (APPLICATION CI). THE C19 REC, POS 7-41, ALLOWS THE FILER TO DESCRIBE THE TYPE OF RELATED DOCUMENT IDENTIFIED IN POS 4-6 OF THIS RECORD. IF A VALID DOCUMENT IDENTIFIER (SEE APPENDIX B OF THE CATAIR) IS TRANSMITTED IN POS 4-6, POS 7-41 CANNOT BE BLANK.  
79M: TARIFF NBR NOT ON DATABASE

TARIFF NBR IS NOT FOUND ON EITHER THE HARMONIZED DATABASE. THE MOST COMMON CAUSE FOR THIS ERROR MESSAGE IS THAT A RECENT CHANGE TO THE TARIFF NUMBER HAS OCCURRED AND THE FILER HAS NOT RETRIEVED THE CHANGE. FILERS MUST KEEP UP WITH ALL HARMONIZED UPDATES IN ORDER TO KNOW WHICH TARIFF NUMBERS ARE VALID. IF THE TARIFF NUMBER RECEIVING THIS MESSAGE IS NO LONGER VALID, THE FILER SHOULD DO A HARMONIZED RANGE QUERY THROUGH ABI AND SHOULD EXAMINE THE DESCRIPTION RECORDS OF THE TARIFF NUMBERS RETURNED IN THE QUERY RESULTS TO DETERMINE WHICH TARIFF NUMBER IS THE REPLACEMENT FOR THE REJECTED TARIFF NUMBER.
95I: RECON REQUIRES CONTINUOUS BOND

RECONCILIATION ENTRIES REQUIRE THAT A CONTINUOUS BOND BE ON FILE FOR THE IMPORTER IDENTIFIER IN THE R10 REC, POS 20-31. NOTE: IF THIS MESSAGE OCCURS IN CONJUNCTION WITH ERROR 8PN, IT MAY NOT BE CORRECT IN RELATION TO THE ENTRY IN QUESTION. SEE ERRS 8PN FOR MORE INFORMATION. NOTE: THIS MESSAGE, AS WELL AS ERROR BRIM, WILL ALSO OCCUR IF ERROR 0AA (ENTRY IN R20 RECORD NOT IN ACS) IS GENERATED.
0JA: CERT OF MFR NOT FOUND

THIS DRAWBACK MODULE ERROR MESSAGE MEANS THAT THE CM (CERT MFGR) NUMBER IS IN PROPER FORMAT BUT DOES NOT EXIST FOR THE CM PORT INDICATED.
VHT: DT HS7: YEAR REQUIRED

THIS MESSAGE IS GENERATED IN RESPONSE TO A DOT INTERFACE TRANSMISSION RECORD. IF THE FILER TRANSMITS VEHICLE IDENTIFICATION DATA IN THE DT02 RECORD, THE RECORD MUST INCLUDE A YEAR OF MANUFACTURE IN POS 35-38. IF THIS FIELD IS LEFT BLANK, THIS ERROR MESSAGE WILL BE GENERATED.
AE1: ZIP CODE NOT ALLOWED FOR MEXICO

THIS MESSAGE IS GENERATED IN RESPONSE TO AN "ADD 5106" TRANSACTION, APPLICATION IDENTIFIER TI. IF THE FILER IS REQUESTING A CUSTOMS-ASSIGNED NUMBER FOR A FOREIGN BASED IMPORTER AND THE COUNTRY OF THE IMPORTER IS MEXICO, NO ZIP OR POSTAL CODE IS PERMITTED. IF THE FILER TRANSMITS A POSTAL CODE IN THE T2 REC, POS 70-78, THIS MESSAGE WILL BE GENERATED. 
EJ6: INVOICE DELETED AS REQUESTED

INVOICE DELETED FROM EIH BUT NOT EIX.
457: IT DATE INVALID/CONFLICTING

THIS MESSAGE IS A RESPONSE TO A SUMMARY INPUT TRANSACTION (APPLICATION EI) THE I.T. DATE IS TRANSMITTED IN THE 22 RECORD, POS 64-69.THE DATE MUST BE A VALID DATE IN MMDDYY FORMAT. IF NOT IN THIS FORMAT, THIS ERROR MESSAGE WILL BE GENERATED. 
VGS: FD 701: DMNS INV;PREV DMNS=0'S

THIS ERROR MESSAGE OCCURS WHEN A FILER HAS TRANSMITTED A CONTAINER DIMENSION IN THE "CONTAINER DIMENSION #2" FIELD (REC FD03, POS 69-72) OR "CONTAINER DIMENSION #3" FIELD (REC FD03, POS 73-76) AND THE PREVIOUS CONTAINER DIMENSION FIELD WAS ZERO FILLED. FOR EXAMPLE, IF 0511 WAS TRANSMITTED IN THE "CONTAINER DIMENSION #2" FIELD AND 0000 IN THE "CONTAINER DIMENSION #1" FIELD, THIS REJECT WOULD RESULT.

 Next 10 >>Showing results 1 to 25 of 1405
Add To: add to del.icio.us add to digg add to technorati add to furl add to reddit

If you find this information helpful, please leave a donation to support Informed Trade International's ongoing mission to help importers improve their understanding of international trade.
 
© copyright Informed Trade International a division of danifer.com