|
BL1: |
INVALID CHAR FOUND IN AWB/BL/IT |
THE BILL OF LADING, AIR WAYBILL, OR INBOND NUMBER MUST BE COMPOSED OF NUMBER AND LETTERS ONLY. THE PRESENCE OF ANY OTHER CHARACTERS, INCLUDING DASHES, SLASHES, OR PERIODS, ETC, WILL RESULT IN THIS REJECTION MESSAGE. NOTE--THE ABOVE MESSAGE WILL ALSO BE GENERATED IN A HOUSE BILL IS REPORTED IN CONJUNCTION WITH A MASTER BILL AND THE HOUSE BILL IS NOT LEFT JUSTIFIED IN THE APPROPRIATE POSITION IN THE 22 REC (EI) OR HA REC (HI). |
VBU: |
DT HS7: TIRE CODE/BRAND REQUIRED |
IF A FILER TRANSMITS A 'T' IN THE DOT DT01 RECORD, POSITION 37, THEN THE TIRE MANUFACTURER ID CODE (DT01 RECORD, POSITIONS 38-40) AND THE TIRE MANUFACTURER BRAND NAME (DT01, POSITIONS 41-60) MUST BE SENT. |
AQH: |
ASSOC. NBR NOT DENIED CLAIM |
WHEN PROTESTING DENIAL OF 520(C) OR 520(D) CLAIM, THE USCS ASSIGNED PROTEST NUMBER OF THE DENIED CLAIM IS REQUIRED. THE DATE OF DENIAL OF THAT CLAIM CONSTITUTES THE START OF THE 90 DAY FILING & AMENDMENT PERIOD FOR THE PROTEST. THE NUMBER ENTERED IN THE ASSOCIATED CLAIM NUMBER FIELD IS VALID, BUT THE RECORD INDICATES IT IS EITHER NOT A 520 OR IS NOT IN DENIED STATUS. |
AR3: |
NOTIFY SUB TYPE NOT APPLICABLE |
NOTIFY SUBSTITUTE DATA NOT APPLICABLE. . |
8WZ: |
INVALID SUB-HOUSE BL/AWB NUMBER |
THIS MESSAGE IS GENERATED IN RESPONSE TO A BILL OF LADING UPDATE TRANSACTION (APPLICATION LN). THE SUB-HOUSE BILL NUMBER IS TRANSMTTED IN THE L3 REC, POS 52-63. IF THE NUMBER REPORTED IN THIS FIELD IS FEWER THAN 12 CHARACTERS LONG, THE NUMBER SHOULD BE LEFT JUSTIFIED. IF ANY LEADING SPACES ARE INCLUDED IN THE HOUSE BILL NUMBER, THIS ERROR MESSAGE WILL BE GENERATED. |
08C: |
FILER INVALID FOR DISTRICT |
FILER INVALID FOR DISTRICT |
ASJ: |
PROTESTED ISSUE NOT APPLICABLE |
THE P70 CANNOT BE REPEATED OR TRANSMITTED AS PART OF AN AMENDMENT, ADDENDA, SERVICE REQUEST. |
AEZ: |
RLSE'S NOT REQUIRED BY 30 REC |
THIS MESSAGE OCCURS WHEN A 32 RECORD IS TRANSMITTED IN AN EI ENTRY SUMMARY TRANSACTION (CONSOLIDATED ENTRY RECORD) AND A 'C' IS NOT SENT IN THE 30 RECORD, POSITION 39 SIGNIFYING A CONSOLIDATED ENTRY. |
ADK: |
RLSE FILER NOT=CONSL FILER |
THIS MESSAGE IS GENERATED IN RESPONSE TO AN ENTRY SUMMARY INPUT TRANSACTION, APPLICATION IDENTIFIER EI. THE ENTRY FILER CODE IN THE 32 REC, POS 13-15, MUST AGREE WITH THE FILER CODE OF THE SUMMARY, IN THE 10 REC, POS 58-60. IF THE CODES ARE NOT IDENTICAL, THIS ERROR MESSAGE WILL RESULT. |
EJY: |
UNIT OF MEASURE REQUIRED |
IF THE FILER SENDS A QUANTITY IN THE SUMMARY INPUT (EI APPLICATION, REC 22, POS 51-58) AND DOES NOT ALSO INCLUDE A UNIT OF MEASURE (REC 22, POS 51-58) THIS ERROR MESSAGE WILL BE GENERATED. THE SAME LOGIC APPLIES TO THE CARGO RELEASE INPUT (HI APPLICATION, REC HA, POS 51-58 FOR THE UNIT OF MEASURE). IN THE AUTOMATED INVOICE TRANSACTION (APPLICATION CI), THIS ERROR MESSAGE IS SOMEWHAT MISLEADING. IF THE C34 RECORD IS TRANSMITTED, THE FIRST QUANTITY FIELD, POS 4-18, MUST BE GREATER THAN ZERO. THE FIRST UNIT OF MEASURE IN POS 19-21 IS OPTIONAL. IF THE SECOND UNIT OF MEASURE, POS 37-39, IS TRANSMITTED WITHOUT A SECOND QUANTITY IN POS 22-26, THIS ERROR MESSAGE IS GENERATED. A BETTER MESSAGE WOULD BE "UOM NOT ALLOWED WITH QUANTITY." |
VOL: |
PROC FLR MUST=PREPARER FLR |
THE REMOTE PREPARER FILER CODE SENT IN POSITIONS 51-53 OF THE EI 'B' RECORD MUST BE THE SAME AS THE PROCESSING (ENTRY) FILER CODE 'B' RECORD, POSITIONS 8-10. |
ARG: |
PROTESTANT TYPE REQUIRED |
A VALID VALUE IS REQUIRED IN THE PROTESTANT TYPE FIELD VALID VALUES ARE: D - DRAWBACK CLAIMANT F - FOREIGN MAUFACTURER/PRODUCER/EXPORTER I - IMPORTER/CONSIGNEE M - MASTER OF VESSEL S - SURETY V - VESSEL OPERATOR O - OTHER |
VH9: |
DT HS7: VIN LIST DUP POSITION: 2 |
IF THE FILER REPORTS DOT INFORMATION VIA THE DT03 RECORD AND THE DATA IS INCLUDED IN AN ENTRY SUMMARY INPUT TRANSACTION, THERE ARE FOUR POSITIONS AVAILABLE IN THE DT03 RECORD TO REPORT UP TO FOUR VEHICLE IDENTIFICATION NUMBERS (VIN). IF THE VIN REPORTED IN POSITIONS 5-21 (FIRST VIN FIELD) IS DUPLICATED IN POSITIONS 22-38, THIS ERROR MESSAGE WILL BE GENERATED. |
VHC: |
FD 701:PHONE NBR MUST BE NUMERIC |
THIS ERROR MESSAGE OCCURS WHEN NON-NUMERIC CHARACTERS ARE INPUT INTO THE "CONTACT PHONE NUMBER" FIELD, REC FD04, POS 29-38. THIS IS AN OPTIONAL FIELD. A COMMON PROBLEM IS THAT THE USER WILL SEND A "CONTACT NAME" (REC FD04 POS 19-28) THAT IS LONGER THAN 10 CHARACTERS AND THE FILER'S PROGRAM ALLOWS THE EXTRA CHARACTERS TO SPILL OVER INTO THE PHONE NUMBER FIELD. ALSO, PHONE NUMBERS MUST INCLUDE THE AREA CODE. IF THIS PART OF THE PHONE NUMBER ELEMENT IS LEFT BLANK, ERROR VHC ALSO RESULTS. |
ACZ: |
ADDRESS HAS LEADING SPACE |
A FILER CAN ADD ADDRESS INFORMATION IN SEVERAL APPLICATIONS. IF THE ADDRESS PORTION IS TRANSMITTED WITH A LEADING SPACE IN THE FIRST POSITION, THIS ERROR MESSAGE WILL RESULT. |
ADW: |
MOT MISMATCH ON CONSL RELEASE |
THE MOT'S (MODE OF TRANSPORTATION) MUST BE THE SAME FOR ALL OF THE RELEASES ON A CONSOLIDATED ENTRY. |
BRR: |
EARLIEST ENTRY SUMM DATE MISMATCH |
WHEN THE RECONCILIATION SUMMARY ISSUE CODE ON THE 'RA' TRANSACTION 'R10' RECORD IS OTHER THAN 'NF', THE EARLIEST ENTRY SUMMARY DATE MUST BE GIVEN AND MUST MATCH THE EARLIEST ENTRY SUMMARY DATE OF ANY OF THE ASSOCIATED IMPORTS GIVEN IN THE 'R20' RECORDS. NOTE -- "ENTRY SUMMARY DATE" IS NOT THE SAME AS THE RELEASE DATE. IT CAN NORMALLY BE FOUND ON THE ENAI RECORD ON THE LEFT SIDE OF THE SCREEN JUST ABOVE "IMPT DTE" IN THE "SUMMARY HEADER DATA" SECTION. |
961: |
TOT EST DUTY NOT=TOT EST LINE DUTY |
THE ESTIMATED DUTY TOTAL FROM ALL LINES ON THE SUMMARY TRANSMISSION DOES NOT EQUAL THE AMOUNT SHOWN AS THE TOTAL DUTY. THE 90 REC, POS 3-13, REFLECTS THE TOTAL ESTIMATED DUTY AMOUNT AND MUST EQUAL, TO THE PENNY, THE TOTAL OF ALL THE LINE ITEM DUTY AMOUNTS. UNLIKE THE LINE AMOUNTS, WHICH MAY HAVE AN INDIVIDUAL FLUCTUATION OF UP TO $2.99 PER LINE (SEE MESSAGE 506), THERE IS NO FLUCTUATION PERMITTED BETWEEN THE 90 RECORD FIGURE AND THE TOTAL OF THE LINE AMOUNTS. |
IF TARIFF FLAG = '1', AN INTERNAL REVENUE TAX APPLIES AND MUST BE INPUT ON THE LINE ITEM ENTRY . IF THE TARIFF FILE INDICATES THAT THE TARIFF NUMBER IS SUBJECT TO IRS EXCISE TAXES, THIS MESSAGE WILL BE GENERATED IF NO TAX AMOUNT IS TRANSMITTED IN THE 60 RECORD, POS 59-68. NOTE THAT IN THOSE INSTANCES WHERE THE FILER IS AUTHORIZED TO PAY LESS TAX (OR INADVERTENTLY TRANSMITS INCORRECT TAX), THAN THE STATUTORY TAX RATE WOULD INDICATE, ERROR MESSAGE 42N - "WARNING - EST TAX < COMPUTED TAX" WILL RESULT. |
THE ONLY VALID INPUT FOR THIS FIELD IS 'Y'. OTHERWISE, THE FIELD SHOULD REMAIN BLANK. |
07H: |
EST ARRIVAL DATE NOT IN RANGE |
THE ESTIMATED ARRIVAL DATE ENTERED IS NOT WITHIN THE RANGE ALLOWED. VALID DATES INCLUDE: 1) TODAY'S DATE, 2) ANY DATE UP TO 30 DAYS IN THE PAST, 3) ANY DATE UP TO 5 DAYS IN THE FUTURE. |
ARD: |
SURETY CERTIFICATION N/A |
EITHER THE PROTESTANT IS NOT A SURETY, THE INDICATOR TRANSMITTED WAS A LETTER OR CHARACTER OTHER THAN "Y", OR THE SURETY CERTIFICATION WAS INCORRECTLY USED AS PART OF AN AMENDMENT, ADDENDA, OR SERVICE REQUEST TRANSMISSION. |
461: |
PAY DUE DATE INVALID/CONFLICTING |
THIS MESSAGE WILL RESULT IF THE FILER TRANSMITS A PAYMENT DUE DATE THAT IS AT LEAST ONE WORKING DAY IN THE FUTURE WHEN COMPARED TO THE ABI TRANSMISSION DATE. THE PAYMENT DUE DATE IS TRANSMITTED IN THE 30 RECORD, POS 54-59. |
EIC: |
INVALID PAYMENT TERMS TYPE |
THIS MESSAGE IS GENERATED IN RESPONSE TO AN AUTOMATED INVOICE TRANSMISSION (APPLICATION CI). PAYMENT TERMS MUST BE TRANSMITTED IN THE C02 REC, POS 6-75. EACH PAYMENT TERMS FIELD HAS A TWO CHARACTER "PAYMENT TERMS TYPE", WHICH MUST BE TRANSMITTED IN THE C02 REC, POS 4-5. THE LIST OF VALID PAYMENT TERMS TYPES IS ON PAGE AII-8 OF THE CATAIR. THE USE OF ANY OTHER CODE, OR A BLANK FIELD, IN THIS ELEMENT WILL GENERATE THIS ERROR MESSAGE |
VNU: |
INVALID ACS IMPORT ENTRY TYPE |
THIS DRAWBACK MODULE ERROR MESSAGE MEANS THAT THE ENTRY TYPE FOR THE DESIGNATED IMPORT IS NOT VALID FOR USE ON A DRAWBACK TRANSACTION. THE VALID ENTRY IMPORT ENTRY TYPES ARE '01', '02', '03', '04', '06', '07', '08', '11', '12', '21', '22', '51', '52', AND '53'. IF THE IMPORT HAS ANY OTHER ENTRY TYPE, THIS REJECTION WILL OCCUR BECAUSE THE IMPORT IS NOT A CONSUMPTION OR WAREHOUSE WITHDRAWAL ENTRY. FOR RECONCILIATION, THIS ERROR MEANS THAT THE IMPORT ENTRY WAS NOT A TYPE '01', '02' OR '06'. THESE ARE THE ONLY VALID ENTRY TYPES FOR RECONCILIATION. |
Next 10 >>Showing results 1 to 25 of 1405
If you find this information helpful, please leave a donation to support Informed Trade International's ongoing mission to help importers improve their understanding of international trade.
|
|