ABI Error Message

VLG:	IMPORT TRAILER # OUT OF SEQUENCE

THIS MESSAGE MEANS THAT THE IMPORT TRAILER SEQUENCE NUMBERS ARE OUT OF SEQUENCE IN THE DRAWBACK MODULE. NOTE THAT CONTRACT SEQUENCE NUMBERS ARE 01-99. IF ONLY 1 CONTRACT IS USED ON A CLAIM, THAT CONTRACT NUMBER SHOULD APPEAR IN THE CLAIM HEADER RECORD. THE CONTRACT TRAILER RECORD SHOULD NOT BE USED UNLESS THERE ARE MULTIPLE CONTRACTS ON A CLAIM. THE CONTRACT TRAILER COUNTER IS NOT A COUNT OF CONTRACTS, BUT IS A COUNT OF THE CONTRACT TRAILER RECORDS. IF ONLY ONE CONTRACT IS USED,THE COUNTER SHOULD BE 00, SINCE THERE WILL BE NO TRAILER RECORDS. IF 2 CONTRACTS ARE USED THERE WILL BE ONE CONTRACT TRAILER AND THE COUNT WILL BE 01. THREE CONTRACTS WOULD MEAN TWO TRAILERS AND THE COUNT WOULD BE 02, ETC.. FOR RECONCILIATION, THIS MEANS THAT THE SEQUENCING OF THE IMPORT ENTRY ASSOCIATION RECORDS ('R20') IS OUT OF ORDER.

630:	INVALID MODE OF TRANSPORTATION

IN ORDER FOR CARGO CERTIFICATION TO BE PERFORMED, THE MODE OF TRANSPORTATION (MOT) FIELD MUST BE COMPLETED. INFORMAL ENTRY SUMMARY TRANSACTIONS (APPLICATION IDENTIFIER EI) WHICH REQUEST CARGO CERTIFICATION, BUT DO NOT PROVIDE THE MOT IN THE 20 REC, POS 28-29, WILL RECEIVE THIS ERROR MESSAGE. SIMILARLY, SEPARATE CARGO RELEASE INPUT TRANSACTIONS (APPLICATION IDENTIFIER HI) WHICH OMIT THE MOT (H1 REC, POS 32-33) WILL ALSO RECEIVE THIS ERROR MESSAGE, WHETHER OR NOT THE RELEASE CERTIFICATION CODE (H1 REC, POS 34) IS ALSO TRANSMITTED. (INFORMAL ENTRY SUMMARY INPUT WHICH DOES NOT REQUEST CARGO CERTIFICATION WILL BE ACCEPTED WITHOUT THE MOT).

8WP:	INTENSIVE EXAM DATE EXCEEDED

THIS MESSAGE WILL USUALLY BE GENERATED IN RESPONSE TO A BILL OF LADING UPDATE TRANSACTION (APPLICATION LN). FILERS ARE PERMITTED, WITHIN SET LIMITS, TO CHANGE THE ESTIMATED ARRIVAL DATE CREATED BY THEIR INITIAL CARGO RELEASE INPUT. (SEE ERROR MESSAGE 8WQ, 8WK, AND 8WO). ANOTHER RESTRICTION IS THAT THE ESTIMATED ARRIVAL DATE CANNOT EXCEED THE DATE OF ANY INTENSIVE EXAMINATION DATE THAT HAS BEEN ENTERED ON THE SSAI RECORD. IF THE FILER'S LN INPUT CONTAINS SUCH A DATE, THIS ERROR MESSAGE WILL BE GENERATED.

99L:	IMP/LIC NOT ON AGR CHEESE FILE

IMPORTER / AGRICULTUREAL COMBINATION HAS NOT BEEN ESTABLISHED IN THE "ALM" DATA BASE. IN ABI, THE LICENSE TRANSMITTED IN THE FILER'S ENTRY SUMMARY INPUT, ON THE 51 REC, POS 38-47, HAS NOT BEEN LISTED ON THE ALM DATABASE FOR THE IMPORTER SHOWN ON THE ENTRY.

AP2:	HEADER/DETAIL DATA REQUIRED

ONE OR MORE REQUIRED RECORDS IS MISSING. A P10 IS REQUIRED FOR INITIAL, AMENDMENT, ADDENDA, AND SERVICE REQUESTS. THE P11 IS REQUIRED FOR INITIAL FILING. THE P11 SHOULD BE USED AS PART OF THE AMENDMENT OR ADDENDA ONLY TO CHANGE A 'N' (NO) SAMPLE AND/OR 'N' (NO) HARDCOPY INDICATOR TO 'S' (SENT). THE P15 RECORD IS REQUIRED FOR INITIAL FILING. THE P16 RECORD IS REQUIRED WHEN FURTHER REVIEW IS REQUESTED IN THE ACCOMPANYING P10 OF THE INITIAL FILING OR AMENDMENT TRANSACTION.

VNY:	CLAIM DUTY CANNOT EXCEED PAID

THIS DRAWBACK MODULE ERROR MESSAGE MEANS THAT THE AMOUNT OF DUTY CLAIMED AGAINST THE IMPORT FOR THIS DRAWBACK CLAIM EXCEEDS THE TOTAL DUTY ORIGINALLY AVAILABLE FOR THE ENTRY. THESE ERRORS WILL OCCUR IF THE IMPORT ENTRY IS BEING DESIGNATED FOR DRAWBACK FOR THE FIRST TIME AND THE CLAIMED DUTY AMOUNT EXCEEDS THE ORIGINAL AVAILABLE AMOUNT, OR IF THE CLAIM IS A TYPE '46' AND THE CLAIMED DRAWBACK EXCEEDS THE CURRENT AVAILABLE DUTY. NOTE: THERE ARE OTHER ODD CONDITIONS WHERE THE MESSAGE WILL OCCUR DUE TO NO FAULT OF THE FILER. IF THE FILER INDICATES THAT MORE MONIES WERE PAID THAN ARE REFLECTED IN ACS (E.G. SUPPLEMENTAL DUTIES ON A VOULUNTARY TENDER FOR ASSISTS WAS TENDERED, BUT THE COLLECTION WAS NOT POSTED TO THE ENTRY), THE FILER SHOULD BE INSTRUCTED TO DESIGNATE THE ADDITIONAL MONIES ON CM 999999/9900. THIS CM WAS CREATED JUST FOR THIS TYPE OF CONDITION.

BRA:	EXPECTED R17 AMT(S) = ZEROES

IF THE RESULT OF SUBTRACTING THE R90 ORIGINAL DUTY/TAX/FREE AMOUNT FROM THE RECON DUTY/TAX/FREE AMOUNT EQUALS ZERO OR LESS THAN ZERO, THE PAYABLE AMOUNTS FOR THE CORRESPONDING FIGURE MUST ALSO EQUAL ZERO IN THE R17 RECORD. IF THE R17 RECORD IS GREATER THAN ZERO, THIS ERROR MESSAGE WILL RESULT. AS ALL THREE AMOUNTS (DUTY, TAXES, OR FEES) APPEAR IN BOTH THE R90 AND R17 RECORDS, MAKE SURE TO CHECK ALL THREE ELEMENTS IF THIS ERROR MESSAGE IS GENERATED FOR AN ENTRY.

VKS:	HLO: MAX 15 SORT FIELDS EXCEEDED

A MAXIMUM OF FIFTEEN FIELDS MAY BE SELECTED FOR FORMULATE DEFAULT SORT CRITERIA FOR A TABLE LOCATE DEFINITION. THE FIELD(S) IN ERROR EXCEED THIS LIMIT.

DLA:	WARNING - NO WPN APPV'L- CHK PRIV

THIS MESSAGE OCCURS IN THE AUTOMATED DRAWBACK MODULE. IT IS A 'WARNING', NOT A FATAL ERROR, THAT APPEARS IF THE CLAIMANT HAS APPLIED FOR THE WAIVER OF PRIOR NOTICE PRIVILEGE, BUT HAS NOT YET BEEN APPROVED. MESSAGE DLA WILL CONTINUE TO BE A WARNING ONLY AFTER 4/6/1999.

VGZ:	FEI NOT FOUND ON ACS

THIS MESSAGE OCCURS WHEN A FILER QUERIES ABI TO DETERMINE WHETHER AN FDA ESTABLISHMENT NUMBER (FEI) IS ON FILE. ALL TWELVE NUMBERS MUST BE USED INCLUDING LEADING ZEROS. THE FILER USES THE FDPP-10 RECORD SHOWN ON PAGE OGQ-14 OF THE CATAIR WITH A "Q" IN THE ACTION CODE. THIS MESSAGE IS RETURNED WHEN THE FEI NUMBER QUERIED IS NOT FOUND IN ACS. A COMMON REASON IS BECAUSE THE FILER IS NOT QUERYING ALL 12 NUMBERS. THEY SHOULD RESEND THE QUERY USING ALL NUMBERS INCLUDING LEADING ZEROS.

VMJ:	CANNOT DELETE - WHS/W ASSOCIATED

A REQUEST TO DELETE A WAREHOUSE SUMMARY WAS INVALID BECAUSE WAREHOUSE WITHDRAWALS ARE ASSOCIATED WITH THE SUBJECT SUMMARY.

EJK:	INVALID TOTAL INVOICE VALUE

THIS ERROR MESSAGE IS GENERATED IN RESPONSE TO AN AUTOMATED INVOICE TRANSACTION (APPLICATION CI). THE C81 RECORD, POS 8-22 (WITH TWO DECIMAL PLACES OCCUPYING THE LAST TWO POSITIONS) DISPLAYS THE TOTAL INVOICE VALUE FOR THE INVOICE BEING TRANSMITTED. THIS FIGURE IS THE SUM OF THE VARIOUS C33 RECORD INVOICE AMOUNTS, WITH ADJUSTMENTS FOR VARIOUS ALLOWANCES AND CHARGES, AS OUTLINED ON PAGE AII-59, NOTE 1. IF THE TOTAL OF ALL C33 AND RELATED RECORDS, ROUNDED TO TWO DECIMAL PLACES, DOES NOT EXACTLY AGREE WITH THE FIGURE REPORTED IN POS 8-22 OF THE C81 RECORD, THIS ERROR MESSAGE WILL BE GENERATED.

VLJ:	DUP MFGR # ENCOUNTERED/CERT MFGR

THIS DRAWBACK MODULE ERROR MESSAGE MEANS THAT THE FILER HAS GIVEN US THE SAME CM NUMBER (CERT MFGR #) MORE THAN ONCE ON THE CLAIM. JUST AS WITH IMPORT ENTRIES CLAIMED ON THE DISKETTE OR VIA ABI, THE CM NUMBER SHOULD ONLY APPEAR ONCE WITH THE TOTAL DRAWBACK CLAIMED FOR THAT CM.

AE3:	SECONDARY ADDRESS REQUIRED

THIS MESSAGE IS GENERATED IN RESPONSE TO AN 'ADD 5106' TRANSACTION, APPLICATION IDENTIFIER TI. IF A POST OFFICE BOX IS TRANSMITTED IN THE T1 RECORD, POS 48-79, A SECONDARY ADDRESS IS REQUIRED TO BE SENT IN THE TB/TC RECORDS.

VHV:	DT HS7: VIN REQUIRED

IF THE FILER REPORTS DOT INFORMATION TO ABI AND THE DT01 RECORD SHOWS A CLARIFICATION CODE OF "V" IN POSITION 37, A SECOND RECORD (DT02 USUALLY, BUT THE DT03 IS ALLOWED, AS WELL) IS REQUIRED TO REPORT THE VEHICLE IDENTIFICATION NUMBER. IF THAT RECORD OMITS THE VIN, THIS ERROR MESSAGE WILL BE GENERATED.

ACX:	IMP TYPE REQUIRED FOR US ADDRESS

THIS MESSAGE IS USUALLY GENERATED IN RESPONSE TO AN ABI 5106 UPDATE TRANSACTION (APPLICATION TI). FOR IDENTIFICATION NUMBERS BEING ADDED TO ABI, IF THE ADDRESS IS IN THE UNITED STATES, THE IMPORTER MUST HAVE ONE OF FOUR IDENTIFICATION TYPES INCLUDED IN THE T1 REC, POS 80.THEVALID TYPES ARE: "C" (CORPORATION), "P" (PARTNERSHIP), "I" (INDIVIDUAL), OR "S" (SOLE PROPRIETOR).  ANY OTHER INDICATOR, INCLUDING A BLANK SPACE, WILL GENERATE THIS MESSAGE. NOTE: AS OF MAY 1998, THIS ERROR MESSAGE IS GENERATED WITHOUT THE ACCOMPANYING ERROR CODE "ACX".

4BL:	ENTRY WAS NOT ORIGINALLY ABI

ALTHOUGH THE DISKETTE PROGRAM IS NOT ABI AND THE CLAIMS ARE NOT ABI, WE USE SIMILIAR PROGRAMMING AS THE SOURCE OF CLAIM CREATION. IF THE CLAIM HAS BEEN COMPLETELY INPUT MANUALLY AND RECORDS EXIST AT THE TIME THE ABI OR DISKETTE JOBS ARE RUN, THE DISKETTE AND ABI WILL NOT PERMIT THE OVERLAY OF DATA.

Q06:	STATEMENT NOT ON FILE

EITHER THE STATEMENT NUMBER GIVEN IN POSITIONS 15 THROUGH 24 OF THE QT RECORD CANNOT BE FOUND ON THE DSA FILE OR THE STATEMENT NUMBER WAS NOT RIGHT JUSTIFIED WITH A ZERO IN POSITION 14. WHEN CUSTOMS BILLS ARE AVAILABLE FOR PAYMENT THROUGH ACH, POSITION 14 WILL BE CHANGED TO ACCEPT OTHER NUMBERS. THE MOST COMMON REASON FOR THIS MESSAGE IS THAT ALL ENTRIES ORIGINALLY LISTED ON THE STATEMENT HAVE BEEN DELETED, EITHER BY THE FILER OR BY CUSTOMS. ONCE ALL ENTRIES ARE REMOVED FROM THE STATEMENT, THE STATEMENT NUMBER DROPS OUT OF THE SYSTEM AND CANNOT BE USED IN AN ACH PAYMENT TRANSACTION.

002:	INVALID UNIT OF MEASURE

UNIT OF MEASURE INPUT IS NOT AN ACCEPTED ALPHA-NUMERIC CODE, OR IS FORMATTED INCORRECTLY. FOR AUTOMATED INVOICE INPUT PURPOSES, THE ABOVE MESSAGE RELATES TO DATA TRANSMITTED IN THE C33 REC, POS 19-21 OR 61-63. VALID UNITS OF MEASURE (AS LISTED IN APPENDIX C OF THE CATAIR) SHOULD BE REPORTED IN THESE TWO FIELDS; HOWEVER, ANY REASONABLE ABBREVIATION WILL BE ACCEPTED IN THE CI APPLICATION (I.E. "DOZ" OR "DZ" FOR DOZEN, ETC.) IF POS 19-21 OR 61-63 ARE BLANK, AND A QUANTITY IS TRANSMITTED IN POS 4-18, THIS ERROR MESSAGE WILL BE GENERATED.

EIV:	UNIT, PERCENT, OR QUANTITY REQ

THIS MESSAGE IS GENERATED IN RESPONSE TO AN AUTOMATED INVOICE TRANSMISSION (APPLICATION CI). IF AN ALLOWANCE OR CHARGE (DUTIABLE OR NONDUTIABLE) IS INDICATED BY THE PRESENCE OF ONE OF THE SIX VALID INDICATORS IN THE C17 REC, POS 4, THE FILER MUST SPECIFY THE CONDITIONS UNDER WHICH THE ALLOWANCE OR CHARGE IS MADE. THE C17 RECORD MUST, THEREFORE, HAVE ONE, AND ONLY ONE OF THE FOLLOWING COMBINATION OF FIELDS PRESENT: 1) RATE/UNIT + UNIT PRICE BASIS + UNIT OF MEASURE OR 2) ALLOWANCE/CHARGE PERCENT OR 3) UNIT OF MEASURE + ALLOWANCE/CHARGE QUANTITY. IF ONE OF THE ABOVE COMBINATION OF ELEMENTS IS NOT TRANSMITTED IN THE C17 RECORD, THIS MESSAGE WILL BE GENERATED. THE SAME LOGIC APPLIES TO THE C51 RECORD.

EI0:	INVOICE LINE CAN'T BE ZERO

THIS MESSAGE IS GENERATED IN RESPONSE TO AN AUTOMATED INVOICE TRANSMISSION (APPLICATION CI). EACH ITEM ON AN INVOICE IS DESCRIBED IN THE C31 THROUGH C39 RECORDS. THE C31 RECORD CONTAINS A COUNTER CALLED THE INVOICE LINE NUMBER IN POS 4-7. THE FIRST SUCH RECORD TRANSMITTED ON AN INVOICE INPUT WOULD BE "001", ETC. "000" IS NOT A VALID INVOICE LINE NUMBER AND WILL GENERATE THIS ERROR MESSAGE IF USED.

4F7:	TARIFF NUMBER INVALID

TARIFF NUMBER MUST BE IN THE FOLLOWING FORMAT: ABI - 10 DIGITS, CHECK DIGIT IS UNNECESSARY NON- ABI - 10 DIGITS, AND NUMERIC CHECK DIGIT FROM THE ABOVE, OR IF THE FIELD CONTAINS ALPHABETIC CHARACTERS, THIS MESSAGE WILL BE PROVIDED.

591:	LINE ITEMS INVALID FOR ENTRY TYPE

THIS MESSAGE WILL RARELY BE OBSERVED ON ABI TRANSMISSIONS UNLESS THE FILER MANAGES TO TRANSMIT AN ENTRY TYPE IN THE EI APPLICATION (10 REC, POS 71-72) THAT DOES NOT PERMIT THE REPORTING OF LINE ITEM DETAILS (40-62 RECORDS). USUALLY, THE ENTRY TYPE WILL BE THE ERROR (SUCH AS REPORTING A NON-EXISTENT ENTRY TYPE). MOST AUTOMATED SYSTEMS WILL NOT ALLOW FILERS TO USE ENTRY TYPES THAT ARE NOT CURRENTLY USED FOR IMPORT TRANSACTIONS. THUS, THIS MESSAGE WILL RARELY SURFACE.

VM0:	HLN:OVERRIDE SEQUENCE NBR INVALID

THE OVERRIDE SEQUENCE NUMBER IS A REQUIRED FIELD. SEQUENCE NUMBERS MUST BE UNIQUE SEQUENTIAL ASCENDING NUMBERS STARTING FROM 01.

VKQ:	HLS: MAX 15 DEF SEL FLDS EXCEEDED

A MAXIMUM OF FIFTEEN FIELDS MAY BE SELECTED TO FORMULATE DEFAULT SELECTION CRITERIA FOR A TABLE LOCATE DEFINITION. THE FIELD(S) IN ERROR EXCEED THIS LIMIT.

 Next 10 >>Showing results 1 to 25 of 1405