|
AQZ: |
TEST CASE NUMBER NOT ON FILE |
A MATCH FOR THE NUMBER ENTERED IN THE TEST SUMMONS NUMBER FIELD MUST BE FOUND IN THE USCS COURT SUMMONS FILE. A MATCH WAS NOT FOUND. ONLY SUMMONSES FILED AGAINST THE UNITED STATES CUSTOMS SERVICE ARE RECORDED IN ACS. SUMMONSES SERVED AGAINST OTHER AGENCIES, SUCH AS THE DEPARTMENT OF COMMERCE, CANNOT BE USED AS TEST CASE NUMBERS. |
VA6: |
OGA OI REC MAY NOT BE BLANK |
THE "OI" RECORD IS USED IN OTHER GOVERNMENT AGENCY ENTRIES. THE DESCRIPTION IS LOCATED IN THE CATAIR, PAGE OG-11. THIS RECORD IS SENT WHEN THERE IS DATA TO BE SENT (I.E. THE LINE IS NOT "DISCLAIMED"). IF SENT, THE RECORD MUST NOT BE BLANK. THERE MUST BE A COMMERCIAL DESCRIPTION SENT (POS 11-80). THE TARIFF DESCRIPTION IS NOT TO BE SENT. |
AQ0: |
NO FILING PERIOD BASE DATE |
WHEN A FILING/AMENDMENT BASIS INDICATOR IS USED, A FILING PERIOD BASE DATE REQUIRED. THE FILING PERIOD BASE DATE IS BLANK. |
VDR: |
FTZ ENTRY REQUIRES FIRMS CODE |
THE FIRMS CODE (REC 20, POS 72-75) IS MANDATORY FOR ENTRY TYPE 06 (EI APPLICATION) OR REC H2, POS 3-6 IN THE HI APPLICATION. |
VHG: |
DT HS7: ISO CODE REQUIRED |
THIS CODE (RECORD DT01 POS 30-31) IS REQUIRED WHEN BOX NUMBER (RECORD DT01, POS 8-9) 05, 06, OR 12 IS TRANSMITTED. (NOTE: IF BOX 05 IS USED, A DT02 RECORD IS ALSO REQUIRED, EVEN IF THE IMPORTED ARTICLE IS NOT A VEHICLE. (THIS IS A SYSTEM DESIGN FLAW.) ISO CODE CANNOT BE USED WITH ANY OTHER HS-7 BOX NUMBER THAN THOSE SPECIFIED IN THIS MESSAGE. |
27Q: |
*CENSUS* MAXIMUM CHARGES EXCEEDED |
THE AGGREGATE CHARGES FOR THE LINE EXCEEDS 5,000,000 FOR VESSEL OR 1,000,000 FOR AIR. THIS MAY BE NECESSARY WHEN THE CRITERIA MUST BE DIFFERENT FOR ACS/ABI THAN THE STATISTICAL EDITS AT CENSUS. |
ARH: |
PROTESTANT TYPE INVALID |
A VALID VALUE IS REQUIRED IN THE PROTESTANT TYPE FIELD. VALID VALUES ARE: D - DRAWBACK CLAIMANT F - FOREIGN MANUFACTURER/PRODUCER/EXPORTER I - IMPORTER/CONSIGNEE M - MASTER OF VESSEL S - SURETY V - VESSEL OPERATOR O - OTHER THE VALUE SUBMITTED IN THE PROTESTANT TYPE FIELD IS NOT A VALID VALUE. |
60M: |
COUNTRY CODE(S) MUST BE PRESENT |
COUNTRY CODE(S) MUST BE PRESENT WHEN COUNTRY RESPONSIBILITY CODE = 1 OR 2. COUNTRY RESPONSIBILITY CODE 1 = INDIVIDUAL COUNTRIES; 2 = COUNTRY RANGE |
THE CASE (ANTIDUMPING OR COUNTERVAILING) REPORTED BY THE ABI FILER IN AN ENTRY SUMMARY TRANSACTION (APPLICATION IDENTIFIER EI) IS A TERMINATED CASE NUMBER. CASE NUMBERS ARE REPORTED IN THE 60 REC, POS 13-22 FOR CVD CASES AND POS 23-32 FOR ADA CASES. |
42A: |
SPI INVALID FOR CATEGORY |
IF SPI FOR THIS ENTRY IS'G' THEN CATEGORY MUST BE '443', '444', '643', '644', '843', OR '844'. |
0DJ: |
PRESENT DATE < ARRIVAL DATE |
THIS MESSAGE IS GENERATED IN RESPONSE TO A CARGO RELEASE DATA INPUT TRANSACTION (APPLICATION HI). IF THE DATE OF PRESENTATION IS ELECTED AS THE ENTRY DATE, A "P" IS TRANSMITTED IN POS 23 OF THE H2 RECORD. SIMULTANEOUSLY, THE FILER MUST SEND A "PRESENTATION DATE" IN POS 50-55 OF THE H1 RECORD. THIS DATE CANNOT BE PRIOR TO THE ESTIMATED ARRIVAL DATE, TRANSMITTED IN POS 34-39 OF THE H1 RECORD. IF IT IS, THIS ERROR WILL BE GENERATED. |
VEL: |
FC 740:QUANTITY MUST BE > ZERO |
IF THE CONDITIONAL FCC FC02 RECORD IS SENT, THE FCC QUANTITY IN POSITIONS 5-16 OF THIS RECORD MUST BE GREATER THAN ZERO. |
84N: |
US ADDR SHOULD HAVE IR NBR OR SSN |
BROKER CANNOT REQUEST CUSTOMS-ASSIGNED NUMBER FOR U.S. ADDRESS. |
BRH: |
OTHER RECON ALREADY ON FILE |
FILER HAS ATTEMPTED TO FILE A RECON AGAINST AN IMPORT ENTRY FOR AN 'OTHER' ISSUE AND A RECON IS ALREADY ON FILE AGAINST THAT IMPORT ENTRY FOR 'OTHER' ISSUE. NOTE: IF THIS ERROR IS GENERATED IN ADDITION TO ERROR RBL, 'RECON EXISTS- REPLACE OR DELETE', CORRECTING THAT ERROR WILL USUALLY REMOVE ERROR BRH AT THE SAME TIME. |
RBR: |
RECON FLR/LOCATION NOT PERMITTED |
IF POSITIONS 47-53 OF THE 'B' RECORD FOR THE 'RA' RECONCILIATION SUMMARY TRANSACTION ARE FILLED-IN, AN ACS RECORD MUST EXIST FOR THAT PREPARER FILER CODE AND PREPARER DDPP TO RELATE THEM TO THE 'B' RECORD PROCESSING DDPP. THIS MESSAGE WILL OCCUR IF NO DATA PRESENT IN POSITIONS 47-53 AND THE PROCESSING DDPP AND FILER CODE IN THE 'B' RECORD ARE VALID ON THE FILER PROFILE, BUT DO NOT AGREE WITH THE FILER AND DDPP OF THE SUMMARY IN THE 'R10' RECORD. IF POSITIONS 47-53 ARE FILLED, THERE IS A RECORD TO RELATE THE PREPARER DDPP AND FILER TO THE PROCESSING DDPP AND FILER, BUT THE PROCESSING DDPP AND FILER DO NOT AGREE WITH THE 'R10' DDPP AND FILER, THIS MESSAGE WILL OCCUR. THIS MESSAGE WILL USUALLY OCCUR IN COMBINATION WITH ERROR MESSAGE 'RBP'. |
99L: |
IMP/LIC NOT ON AGR CHEESE FILE |
IMPORTER / AGRICULTUREAL COMBINATION HAS NOT BEEN ESTABLISHED IN THE "ALM" DATA BASE. IN ABI, THE LICENSE TRANSMITTED IN THE FILER'S ENTRY SUMMARY INPUT, ON THE 51 REC, POS 38-47, HAS NOT BEEN LISTED ON THE ALM DATABASE FOR THE IMPORTER SHOWN ON THE ENTRY. |
29H: |
INVALID DIST/PORT/BROKER |
THIS MESSAGE OCCURS WHEN A FILER SENDS A DISTRICT/PORT/FILER COMBINATION IN THE 10 RECORD OF AN ENTRY SUMMARY EI TRANSACTION, AN H1 RECORD FOR AN HI TRANSACTION OR AN 01 RECORD OF A HN TRANSACTION THAT DOES NOT EXIST IN THE FILER PROFILE DATABASE. |
VA1: |
INV DECLARATION IN 'OA' REC |
THIS ERROR MESSAGE WILL BE GENERATED IF THE OA RECORD IS TRANSMITTED BLANK. |
ACX: |
IMP TYPE REQUIRED FOR US ADDRESS |
THIS MESSAGE IS USUALLY GENERATED IN RESPONSE TO AN ABI 5106 UPDATE TRANSACTION (APPLICATION TI). FOR IDENTIFICATION NUMBERS BEING ADDED TO ABI, IF THE ADDRESS IS IN THE UNITED STATES, THE IMPORTER MUST HAVE ONE OF FOUR IDENTIFICATION TYPES INCLUDED IN THE T1 REC, POS 80.THEVALID TYPES ARE: "C" (CORPORATION), "P" (PARTNERSHIP), "I" (INDIVIDUAL), OR "S" (SOLE PROPRIETOR). ANY OTHER INDICATOR, INCLUDING A BLANK SPACE, WILL GENERATE THIS MESSAGE. NOTE: AS OF MAY 1998, THIS ERROR MESSAGE IS GENERATED WITHOUT THE ACCOMPANYING ERROR CODE "ACX". |
SG1: |
CANADA SUGAR CERT REQUIRED |
THE CANADIAN SUGAR CERTIFICATE DATA IS REQUIRED VIA THE 'EI' 52 RECORD OR FOR THE ENTRY LINE (ON-LINE) BECAUSE THE C/O AND C/E IS CANADA, THE TARIFF NUMBER IS ONE OF THOSE REQUIRING THE CERTIFICATE AND BOTH THE DUTY-COMP AND EXPORT DATES ARE ON OR AFTER JUNE 1, 1999. |
RB4: |
EXCESS/INVALID FEE COUNT |
FOR RECONCILIATION, THE 'R20' ABI INPUT RECORD FEE COUNT IS EITHER NOT NUMERIC (INVALID) OR > 10 (EXCESS). IN OTHER WORDS, POS 78-79 OF THE R20 RECORD MUST SHOW A NUMERIC FIGURE WHICH EQUALS THE NUMBER OF FOLLOWING R21 RECORDS. IF ONE R21 RECORD FOLLOWS THE R20 RECORD, POS 78-79 WOULD BE "01", E.G. IF THE FILER SPACE FILLS THIS ELEMENT BUT TRANSMITS AN R21 RECORD, THIS MESSAGE WILL RESULT (THE 'INVALID' PART OF THE NARRATIVE). IF THE FILER TRANSMITS A FIGURE GREATER THAN '10', THIS MESSAGE WILL ALSO RESULT (THE 'EXCESS' PART OF THE MESSAGE). NOTE: IF THE ENTRY IS AN AGGREGATE RECON, AND NO R21 RECORDS ARE TRANSMITTED, THE FILER MUST STILL SHOW '00' IN POS 78-79 OF EACH R20 RECORD. |
42J: |
INVALID IT/AWB/BL QUANTITY |
THE MANIFESTED QUANTITY (ENTRY HEADER LEVEL) IS REPORTED IN THE SUMMARY INPUT IN REC 22, POS 51-58. THIS QUANTITY MUST BE GREATER THAN ZERO. IF ZERO IS TRANSMITTED, OR IF THE QUANTITY CONTAINS ANY CHARACTERS OTHER THAN NUMERICS, THIS MESSAGE WILL BE GENERATED. |
VAL: |
FW 3-177: LICENSE NOT ON FILE |
THE LICENSE NUMBER WHICH IS TRANSMITTED IN THE FW02 RECORD, POS 45-50 MUST BE RESIDENT IN THE FWL FILE. THE LICENSE NUMBER IS ISSUED BY FSW TO IMPORTERS IMPORT OVER $25,000 ANNUALLY OF MERCHANDISE THAT IS SUBJECT TO FWS. CUSTOMS DOES NOT TRACK CUMULATIVE VALUES. THIS IS THE RESPONSIBILITY OF FWS. FWS UP- LOADS THE U.S. LICENSE INFORMATION TO ACS ONCE A WEEK. IF A FILER HAS BEEN ASSIGNED A U.S. LICENSE NUMBER AND ATTEMPTS TO TRANSMIT IT PRIOR TO THE UPLOAD, THEY SHOULD BE REFERRED TO THE LOCAL FWS OFFICE FOR INSTRUCTIONS ON CLEARING MERCHANDISE UNTIL THE LICENSE IS RESIDENT IN OUR DATA BASE. THERE ARE NO EDITS TO REQUIRE THE USER TO TRANSMIT THE LICENSE NUMBER, BUT IF A LICENSE NUMBER IS TRANSMITTED, THERE MUST BE AN EXACT MATCH WITH ONE OF THE LICENSE NUMBERS IN THE FWL FILE. |
EJF: |
NAME OF DECLARANT REQUIRED |
THIS MESSAGE IS GENERATED IN RESPONSE TO AN AUTOMATED INVOICE TRANSACTION (APPLICATION CI). THE C95 RECORD IS PROVIDED TO ENABLE THE FILER TO TRANSMIT A "SIGNATURE" FOR THE INVOICE. THE FIELD IS CALLED "DECLARANT" AND IS REPORTED IN POS 5-36.IF THIS ELEMENT IS LEFT BLANK, THIS ERROR MESSAGE WILL BE GENERATED. |
VNH: |
FD 701: BASE UNIT MUST BE LAST |
IN THE FDA INTERFACE, UP TO SIX QUANTITIES AND UNITS OF MEASURE (UOM) CAN BE TRANSMITTED. FIVE QUANTITIES/UOM CAN BE SENT IN REC FD02, POS 5-18, 19-32, 33-46, 47-60 AND 61-74 (CATAIR, PAGE OGA-30). THE SIXTH, IF APPLICABLE, IS SENT IN REC FD04, POS 5-18 (CATAIR, PAGE OGA-35). IF QUANTITIES/UOM'S ARE SENT THEN AT LEAST ONE OF THEM MUST BE A "BASE UNIT" AND IF MORE THAN ONE IS SENT THE BASE UNIT MUST BE IN THE LAST POSITION. IF, FOR EXAMPLE, THREE QUANTITIES/UOM'S ARE SENT THE BASE QUANTITY MUST BE IN THE "UNIT 3 QUANTITY AND MEASURE BLOCK (REC FD01, POS 33-46). IF ONLY ONE QUANTITY/UOM IS SENT IT MUST BE A BASE UNIT AND SENT IN THE UNIT 1 QUANTITY AND MEASURE BLOCK (REC FD01, POS 1-18). FDA BASE UNITS ARE SHOWN IN THE CATAIR, PAGES OGA-31. |
Next 10 >>Showing results 1 to 25 of 1405
If you find this information helpful, please leave a donation to support Informed Trade International's ongoing mission to help importers improve their understanding of international trade.
|
|