ABI Error Message

VKT:	HLL: MAX 5 LOCATE FLDS EXCEEDED

A MAXIMUM OF FIFTEEN FIELDS MAY BE SELECTED TO APPEAR ON A LOCATE DISPLAY. THE FIELD(S) IN ERROR EXCEED THIS LIMIT.

VPY:	D31 RECORD NOT REQUIRED

THIS ERROR MESSAGE OCCURS IN THE NAFTA DUTY DEFERRAL MODULE. THE D31 RECORD SPECIFIES THE ADD OR CVD BONDED OR PAYABLE DUTIES. IT IS SENT IN COMBINATION WITH A D11 RECORD WHICH DETAILS THE ADD OR CVD SUMMARY INFORMATION. THIS ERROR MESSAGE IS GENERATED IF A D31 RECORD IS SENT WITHOUT A MATCHING D11 RECORD.

89E:	FEE CODE ENTERED/NOT REQUIRED

THIS MESSAGE WILL BE GENERATED IF A FEE IS TRANSMITTED IN THE 62 RECORD FOR A TARIFF NUMBER THAT DOES NOT CONTAIN A FLAG FOR THAT FEE ON THE TARIFF FILE. THE MOST COMMON EXAMPLE IS THE TRANSMISSION OF A COTTON FEE, CLASS CODE 056, FOR A TARIFF NUMBER THAT DOES NOT HAVE A COTTON FEE ON ITS CURRENT RECORD. FILERS SHOULD VERIFY THE APPLICABILITY OF THE FEE FROM THE TARIFF FILES. THIS MESSAGE WILL ALSO RESULT IF CERTAIN FEES ARE TRANSMITTED INCORRECTLY ON A SET ENTRY. IN THIS CASE, THE MPF FEE (499) AND THE HMF (501) FEES MUST ONLY BE TRANSMITTED WITH THE "X" LINES. OTHER TARIFF SPECIFIC FEES CAN ONLY BE TRANSMITTED WITH THE APPROPRIATE "V" LINES. THIS MESSAGE IS ALSO GENERATED IF THE AMOUNT OF THE COTTON FEE, CALCULATED BY ACS, IS LESS THAN $2.01, USING THE CORRECT RATE. ACS WILL NOT DISPUTE THE FILER'S AMOUNT OF COTTON FEE IN SUCH A SITUATION. IT WILL MERELY ADVISE THE FILER THAT NO FEE IS REQUIRED.

322:	INVALID BROKER MODE

MUST BE NUMERIC; 0,1,2, OR 3.

4BI:	QUOTA ENTRY CANNOT BE CHANGED

THIS MESSAGE IS GENERATED IN RESPONSE TO A STATEMENT ADD/DELETE TRANSACTION (APPLICATION HI). FILERS WHO HAVE ENTRY SUMMARIES IN QUOTA ACCEPTED STATUS AND SIMULTANEOUSLY SCHEDULED FOR PAYMENT VIA ACH ARE NOT PERMITTED TO REMOVE THOSE ENTRIES FROM STATEMENT/ACH STATUS. IF THE STATEMENT ADD/DELETE TRANSACTION IS ATTEMPTED WITH PAY TYPE CODE 1 (NON-STATEMENT), THIS ERROR MESSAGE WILL BE GENERATED.

632:	AMOUNT CANNOT EXCEED 9-DIGITS

TAX, DUTY, CVD OR ADD AMOUNT IS TOO LARGE

8VO:	INVALID QUANTITY

THIS ERROR MESSAGE IS GENERATED IN RESPONSE TO A BILL OF LADING UPDATE TRANSACTION (APPLICATION LN). IF THE L3 RECORD IS TRANSMITTED, AT A MINIMUM, THE BILL OF LADING (OR AIR WAYBILL) NUMBER IS REQUIRED, ALONG WITH THE MANIFESTED QUANTITY AND UNIT OF MEASURE. THE MANIFESTED QUANTITY MUST BE GREATER THAN ZERO. IF ZERO IS TRANSMITTED, THIS ERROR MESSAGE WILL BE GENERATED. IF EITHER THE MANIFEST QUANTITY OR UNIT OF MEASURE FIELDS ARE LEFT BLANK, ERROR MESSAGE 8VH WILL RESULT. NOTE: THE QUANTITY FIELD IN THE LN APPLICATION IS A NUMERIC FIELD AND MUST CONTAIN LEADING ZEROS. IF THE FIELD IS SPACE FILLED EXCEPT FOR THE ACTUAL QUANTITY, THIS REJECT MESSAGE WILL BE ISSUED.

VGA:	FD701: INV LINE#/SEQ

THIS ERROR MESSAGE RESULTS WHEN A FILER SENDS AN FDA CORRECTION (CP TRANSACTION) TO RESPOND TO AN FDA DT REJECT MESSAGE AND THE CUSTOMS LINES THAT THEY ARE SENDING IN THE FDA CORRECTION DO NOT MATCH THE EXACT SEQUENCE OF LINES IN THE SELECTIVITY RECORD. WHEN A CORRECTION IS DONE, THE FILER MUST SEND THE CUSTOMS LINES (WITH THE CORRESPONDING FDA DATA OR DISCLAIM AS APPLICABLE) IN THE EXACT ORDER AS IT APPEARS ON THE SELECTIVITY LINE ITEM SCREEN. THE FILER MUST ALSO SEND ALL CUSTOMS LINES WHETHER OR NOT THEY ARE FDA REGULATED. CHECK THE ORDER OF THE TARIFF NUMBERS IN THE CP SEND AGAINST THE SELECTIVITY LINE ITEM SCREEN. THEY MUST MATCH EXACTLY. THIS MESSAGE ALSO RESULTS WHEN A FILER ATTEMPS TO START A FDA LINE NUMBER WITHIN A CUSTOMS LINE WITH A NUMBER OTHER THAN 001. THE MOST COMMON OCCURANCE IS WHEN CUSTOMS LINE 001 IS SENT AND, FOR EXAMPLE FDA LINES 001 AND 002 ARE SENT WITH IT. THEN THE FILER SENDS CUSTOMS LINE 002 AND STARTS THE FDA LINE NUMBERING WITH 003. THIS REJECT WILL ALSO OCCUR IF THE FILER SENDS BOTH AN FD0 (DISCLAIM) AND FDA DATA FOR THE SAME CUSTOMS LINE ON AN ENTRY SUMMARY INPUT TRANSACTION.

AQB:	FILING DDPP NOT ON FILE

THE VALUE SUBMITTED IN THE FILING DDPP FIELD IS NOT A VALID VALUE ON THE CUSTOMS REGION-DISTRICT-PORT DATABASE.

8WY:	INVALID HOUSE BL/AWB NUMBER

THIS MESSAGE IS GENERATED IN RESPONSE TO A BILL OF LADING UPDATE TRANSACTION (APPLICATION LN). THE HOUSE BILL NUMBER IS TRANSMITTED IN THE L3 REC, POS 36-47. IF THE NUMBER REPORTED IN THIS FIELD IS FEWER THAN 12 CHARACTERS LONG, THE NUMBER SHOULD BE LEFT JUSTIFIED. IF ANY LEADING SPACES ARE INCLUDED IN THE HOUSE BILL NUMBER, THIS ERROR MESSAGE WILL BE GENERATED.

4BB:	SELECTIVITY ALREADY PERFORMED

SELECTIVITY IS PROCESSED IN ABI PRIOR TO ONLINE PROCESSING IF THE ARRIVAL DATE OF THE ENTRY IS LESS THAN 6 DAYS IN THE FUTURE. ONCE SELECTIVITY HAS BEEN PERFORMED, EVEN THOUGH THE ENTRY MAY BE IN ABI STATUS, A REPLACEMENT OF THE ENTRY BY THE BROKER THROUGH ABI IS NOT ALLOWED.

828:	REFERENCE NUMBER VOIDED

THIS ERROR MESSAGE OCCURS WHEN THE REFERENCE CF 4811# USED IN A DRAWBACK TRANSACTION IS VOIDED IN THE IMPORTER FILE. THIS MESSAGE ALSO OCCURS FOR RECONCILIATION WHEN THE REFERENCE CF 4811# IS VOIDED.

ST1:	PREVIOUS SET IS INCOMPLETE

THE PROCESSING OF A SET WAS IN PROGRESS WHEN THIS LINE INTERRUPTED THE SET. IN ABI TERMS, THIS MEANS THAT AN "X" LINE WAS DETECTED ON A PREVIOUS LINE IN THE SUMMARY INPUT (APPLICATION EI), BUT NO "V" LINES OCCURRED PRIOR TO THE REPORTING OF THE LINE BEING REJECTED. FOR EXAMPLE, IF LINE 4 HAS AN "X", LINES 5 AND 6, AT A MINIMUM, MUST HAVE "V" INDICATORS. IF LINE 5 DOES NOT SHOW THE "V", IT WILL BE SHOWN IN THE OUTPUT TO THE FILER WITH THIS ERROR MESSAGE.

ADX:	CONSIGNEE MISMATCH ON CONS RLSE

THE ULTIMATE CONSIGNEE MUST BE THE SAME FOR ALL RELEASES ON A CONSOLIDATED ENTRY.

13M:	MANIFEST QTY MUST BE > ZERO

THE MANIFESTED QUANTITY IS REPORTED BY THE ENTRY FILER IN THE CARGO RELEASE APPLICATION (HI) IN THE HA REC, POS 51-58. IF THE FILER TRANSMITS ZERO AS THE MANIFESTED QUANTITY, THE ABOVE ERROR MESSAGE WILL BE GENERATED.

23M:	SURETY SANCTION IN EFFECT

THIS MESSAGE INDICATES THAT THE SURETY COMPANY SENT BY THE FILER IS UNDER SANCTION.

EID:	PAYMENT TERMS REQUIRED

THIS MESSAGE IS GENERATED IN RESPONSE TO AN AUTOMATED INVOICE TRANSMISSION (APPLICATION CI). PAYMENT TERMS ARE TRANSMITTED IN THE C02 REC, POS 6-75. THIS FIELD MAY NOT BE BLANK OR THIS ERROR MESSAGE WILL BE GENERATED.

2A7:	CARGO RELEASE DATA NOT ON FILE

THIS MESSAGE GENERALLY INDICATES A PROBLEM IN THE CREATION OF CARGO SELECTIVITY RECORDS FROM FILER'S INPUT. EXAMPLE: A FILER SENT IN SEVERAL ENTRIES USING BORDER CARGO RELEASE (APPLICATION HN). BEFORE ABI COULD COMPLETE THE PROCESSING OF THE ENTRIES, THE FILER'S SYSTEM SENT THE SAME ENTRIES AGAIN (WITHIN 12 SECONDS OF THE FIRST TRANSMISSION). THIS DUPLICATION CAUSED DATABASE (DB) ERRORS ON THOSE ENTRIES THAT WERE BEING PROCESSED AT THE INSTANT THE SECOND ITERATION OF THE SAME ENTRY NUMBER REACHED THE MAINFRAME. THE SECOND SET OF ENTRIES HAD PROCESSING DONE, BUT NO ON-LINE RECORDS WERE CREATED. THE ERROR MESSAGE ABOVE WAS CREATED AND ATTACHED TO THE SECOND SET OF ENTRY NUMBERS. THE SOLUTION, IN ALMOST ALL CASES, IS FOR THE FILER TO TRANSMIT ONLY ONCE AND TO WAIT FOR RESULTS BEFORE RE-SUBMITTING DATA FOR THE SAME ENTRY NUMBER.

VQI:	ADD PAYABLE AMOUNT INVALID

THIS ERROR MESSAGE OCCURS IN THE NAFTA DUTY DEFERRAL MODULE. THE TOTAL PAYABLE ANTIDUMPING DUTY IS SENT IN THE D31 RECORD, POSITIONS 15-25. THE ANTIDUMPING DUTY BLOCK IS IN THE D11 RECORD, POSITIONS 14-23. IF THE ANTIDUMPING BONDED DUTY INDICATOR IN THE D11 RECORD, POSITION 39 IS '0' (ADD IS NOT BONDED) THEN THE TOTAL PAYABLE ANTIDUMPING DUTY AMOUNT CANNOT BE SPACES.

4JB:	QUANTITY MUST BE NUMERIC

MUST BE EITHER NUMERIC OR BLANK.

AQW:	FAX INDICATOR REQUIRED

THE FAX INDICATOR CANNOT BE BLANK.

166:	STATEMENT NUMBER NOT ON FILE

THIS MESSAGE IS USED WHEN A REQUESTED STATEMENT NUMBER ON THE ENTRY MASTER FILE DOES NOT EXIST.

AES:	ERROR IN A 32 REC;RLSE 6

THIS MESSAGE FOLLOWS A MORE SPECIFIC ERROR MESSAGE (I.E. "1F5 RELEASE NOT ON FILE") IN A CONSOLIDATE ENTRY SUMMARY TRANSMISSION. IT NOTIFIES THE FILER THAT THE ERROR IS IN THE SIXTH RELEASE IN THE 32 RECORD.

VLQ:	DRAWBACK EXPORT SUMM IND INVALID

THIS MESSAGE MEANS THAT THE FILER HAS USED A CODE OF OTHER THAN 'Y' (YES) OR 'N' (NO) FOR WHETHER THIS IS AN EXPORT SUMMARY CLAIM. THE FILER MUST USE EITHER 'Y' OR 'N' VIA DISKETTE OR A SPACE (NO) OR '1' (YES) FOR ABI. APPLIES TO DRAWBACK MODULE.

0JI:	TARIFF NUMBER MUST BE ENTERED

NUMBER MUST BE ENTERED

 Next 10 >>Showing results 1 to 25 of 1405